您要查找的是不是：
- Also, severe biofouling, physical abrasion, and chemical etching of the glass may erode the sensing surface. 嚴重的玻璃生物淤積、物理磨損和化學腐蝕可能影響感覺表面。
- Stencil manufacturing techniques include chemical etching, laser cutting and electroforming. 鋼網制作技術包括化學腐蝕，激光切割和電鑄。
- It is also found that the subsequent etching treatment in a H3PO4 solution can remove the barrier layer on AAO membrane and improve the regularity of holes. 掃描電鏡觀察顯示，氧化鋁膜的擴孔過程可以去掉阻礙層，并調節孔徑大小，溶去二次氧化后黏附在氧化層表面的一些雜質，從而使氧化鋁模板更為規則有序，孔徑均一。
- The teflon compares with other plastics has thermostablly,bears the chemical etching fine characteristic. 聚四氟乙烯與其它塑料相比具有耐高溫、耐化學腐蝕優良的特點。
- The technics of chemical etching,chemical polishing and chromium electroplating for stainless steel mould were studied. 研究了不銹鋼模具板的化學蝕刻、化學拋光和電鍍鉻工藝。
- A pattern structure in substrate can be formed through connecting many small concave spherical structures formed by chemical etching. 通過腐蝕，硅襯底上會(huì )出現一組凹球面狀的微結構，具有一定輪廓特征的微結構可以由一組這樣的凹球面微結構拼接而成。
- The chemical etching method wa applied to form surface texture of multicrystalline silicon in order to reduce the reflectance of the surface. 為了降低光在多晶硅表面的反射,采用化學腐蝕法在其表面制備了絨面。
- Chemical processing and baking harden the unexposed photoresist, which protects those places in shadow from later stages of chemical etching. 未曝光的光阻劑經化學處理及烘烤而硬化，因此能保護陰影下的區域避過稍后的化學蝕刻。
- By observing and analyzing the formation of PPS with chemical etching, a new model of PPS formation was proposed: inverse crystallography model of PPS formation process. 通過觀察和分析多晶多孔硅化學腐蝕機理提出了一個新模型:多孔硅形成機理的逆結晶學模型。
- With the aid of a water-heater controllable in both temperature and time, the chemical etching method adding a bit hydrofluoric acid and xylene in traditional picric acid sa... 結果表明:利用控溫控時水浴鍋采用傳統飽和苦味酸滴加微量氫氟酸和二甲苯的試劑可清晰顯示不同狀態下的奧氏體晶界。
- This paper introduces a fabricated method of using fused silica as the chip material.It includes standard photolithography, wet chemical etching and bonding techniques. 本文介紹了選用優質石英為芯片基體材料的一種制作方法，關鍵技術包括標準的光刻，濕法腐蝕，鍵合等微加工技術。
- This feature can be eliminated via mechanical polishing and followed by chemical etching, and hence only exciton line was observed for the damage-removed sample. 此篇論文中所有的化合物半導體單晶樣品，在做光學量測之前，皆有經過機械磨光以及化學蝕刻的處理。
- For example, it is challenging for the chemical etching process to drop below a1.5 aspect ratio while, with laser cutting and electroforming, apertures can be produced that have a1:1 aspect ratio to the stencil thickness. 比如，表觀比率低于1.;5對于化學腐蝕試一大挑戰，而激光切割和電鑄可制成表觀比率為1
- A set of conventional processing methods of vanadium and vanadium alloy specimens, including mechanical polishing, mechanical chemical polishing, chemical etching as well as relevant techniques and experiences is introduced. 摘要介紹了一種釩及釩基合金金相試樣的常規制樣方法，即試樣的機械磨光，機械化學拋光，化學侵蝕等技術和經驗。
- For example, it is challenging for the chemical etching process to drop below a 1.5 aspect ratio while, with laser cutting and electroforming, apertures can be produced that have a 1:1 aspect ratio to the stencil thickness. 比如，表觀比率低于1.;5對于化學腐蝕試一大挑戰，而激光切割和電鑄可制成表觀比率為1
- This paper describes a new crosshatching technology on PI flexible substrate, using chemically etching method. 本文介紹一種在撓性聚酰亞胺基材上開窗口的新工藝。
- Because the distribution of molecular director was not affected by lamellar decorating after quench, chemical etching and SEM technique were used to reveal disclination and director patterns. 由于樣品淬火后晶片裝飾在織構上而不影響分子取向矢的分布,因而可以用化學刻蝕和電鏡技術揭示其向錯和取向矢圖。
- Hot stamping process, cold-hot stamping seihan speed and short production cycles, save energy, reduce consumption, eliminated chemical etching process, to reduce environmental pollution. 燙印工藝中，冷燙印制版速度快，生產周期短，節省能源，降低消耗，淘汰了化學腐蝕工藝，減少環境污染。
- Keywords IPS-Empress 2 Dental ceramic Etching treatment Shear bond strength; 牙科陶瓷;酸蝕處理;剪切粘結強度;
- H- passivating Si surface has been achieved by using chemical method, and the nanometer-scale line structure with 5Onm on Si surface has been made by using STM selective oxidation and chemical etch. 利用化學方法實現氫鈍化Si表面，研制確定了STM選擇局域氧化的制備工藝，制備了5onm的氧化硅線條結構，利用化學腐蝕將此圖形轉移到硅襯底上。
