您要查找的是不是：
- The first is a silicon nitride window sandwich (picture below). 第一種是氮化硅夾心窗（下圖）。
- Too high of a surface temperature will result in a silicon nitride reaction. 表面溫度過高容易導致硅、氮發生反應。
- The picokeystone is trapped between the two silicon nitride windows. 小楔塊兒陷于兩個氮化硅窗體中間。
- The common ceramic used for SKF bearing rings and rolling elements is a bearing grade silicon nitride material. 常用于SKF軸承套圈和滾動體的陶瓷材料是軸承級的氮化硅材料。
- Hybrid bearings have rings of bearing steel and rolling elements of bearing grade silicon nitride (Si3N4). 陶瓷混合軸承具有軸承鋼的套圈和軸承級氮化硅的滾動體(Si3N4)。
- Under insufficient lubrication conditions there is no smearing between silicon nitride and steel. 在潤滑不充分的條件下,氮化硅和鋼之間不會(huì )發生沾污。
- On the other hand, it is essential to prepare high quality silicon nitride thin film for gate insulator layer of TFT in order to get excellent TFT. 與此同時,制備高質量的柵絕緣層用氮化硅薄膜也是制備高性能薄膜晶體管(TFT)這一課題的需要。
- It is also used as the etchant for etching Aluminum and Silicon Nitride film in semi-silicon IC. 在硅平面晶圓集成電路生產中，用于鋁及氮化硅的蝕刻；
- Sintering aids were one of key factors affecting microstructure and properties of silicon nitride ceramics. 燒結助劑是影響氮化硅陶瓷的顯微結構和性能的關鍵因素之一。
- This paper presents the dielectric and mechanical properties of porous silicon nitride ceramics. 研究了預燒結對反應燒結多孔氮化硅陶瓷的介電性能和力學性能的影響。
- The effect of holding time on intergranular phase and mechanical property of GPS silicon nitride ceramics was studied. 研究了保溫時間對氣壓燒結(GPS)氮化硅陶瓷晶界相及力學性能的影響。
- It shows that even if using the RF power(13.56 MHz) as the excitation of plasma,the compressive silicon nitride film can be obtained easily. 通常認為高頻下制備得到的氮化硅膜呈現張應力;但是通過實驗;表明即使應用高頻(13.;56MH z)作為激勵源同樣可以沉積出呈現壓應力的氮化硅薄膜。
- Silicon nitride ceram is widely used as a high-temperature structural material and is one of the most promising materials. 氮化硅陶瓷廣泛用作高溫結構材料，是很有前途的陶瓷材料之一。
- From X-ray photoelectron spectroscopy (XPS) experiments, the presence of Si clusters in the silicon nitride films was confirmed. 對不同富矽量的氮化矽薄膜做了紅外和光致發光的比較研究。
- At present, our company mainly produces ceramic balls, ceramic bearings and ceramic rings which are made of silicon nitride, zirconia or alumina. 產品包括陶瓷球、陶瓷軸承、陶瓷刀杯環、陶瓷結構件四大類領域。
- In-situ porous silicon nitride ceramics were prepared directly by the use of silicon dioxide through the carbothermal reduction in nitrogen. 本課題就是利用二氧化硅在氮氣中的碳熱還原反應，一次原位直接制備氮化硅多孔陶瓷預制體。
- The cutting performances,the choices of machining parameters and the uses of silicon nitride ceramics cutting tools are introduced. 介紹了氮化硅陶瓷刀具的切削性能、切削用量的選擇及其應用。
- This paper describes the study on the component and structure of the silicon oxide and silicon nitride films by infra-red absorbed spectrum. 利用紅外吸收譜等微觀分析對氧化硅和氨化硅薄膜的成分和結構進行了研究。
- The devices were passivated by the thin film of Photo-CVD silicon nitride, we found that the reliability of the devices was to be raised. 采用光化學氣相淀積(光CVD)氮化硅薄膜進行器件的表面鈍化;使整個器件提高了可靠性.
- Infiltration strengthening is an effective means to improve the mechanical properties of Reaction Bonded Silicon Nitride(RBSN). 浸漬強化處理是提高反應燒結氮化硅性能的有效措施。
