您要查找的是不是：
- The invention relates to a manufacturing method of a titanium nitride layer as well as an apparatus thereof. 本發明涉及一種氮化鈦層的制造方法及其裝置。
- Titanium nitride offers the customer wear protection in jet engine bearings. 氮化鈦提供了客戶的抗磨損保護的噴氣發動機軸承。
- X-ray diffraction (XRD) measurements reveal formation of titanium nitride in the astreated sample. 利用X射線衍射儀(XRD)對氮化處理后的樣品剛試，得到了樣品的相結構。
- Titanium nitride films were grown by unbalanced magnetron sputtering at different N2 and Ar partial pressure ratios on Ti6Al4V alloy substrate. 采用非平衡磁控濺射技術,在鈦合金(Ti6Al4V)表面沉積氮化鈦薄膜。 通過改變氮氣和氬氣分壓比(PN/PAr)和基體偏壓,制備出不同結構、性能的氮化鈦薄膜。
- Based on the preparation of titanium nitride, the effects for the choice of the precursor on the CVD systems have been illustrated. 摘要本文以氮化鈦的CVD制備為例，說明了源物質的選擇對CVD過程的影響。
- All imported (Austria), cobalt high-speed steel. Co-Steel after titanium nitride coating materials, the best use of state properties. 全部采用進口（奧地利）鈷高速鋼。鈷高速鋼材料經過氮化鈦鍍層，達到最佳使用性能狀態。
- This equipment adopts the titanium nitride metal mixing techs forming ion gold membrane with good abrasion resistance, therefore it fits for various top-grade decorating membrane. 該設備采用氮化鈦表面摻金技術,形成離子金膜層,耐磨性非常好,廣泛用于各種高檔裝飾膜層。
- Hard and wear-resistant titanium nitride coatings were deposited by pulsed high energy density plasma technique on silicon nitride ceramic cutting tools at ambient temperature. 用高能量密度脈沖等離子體于室溫下在氮化硅陶瓷刀具上成功沉積了高硬耐磨的氮化鈦涂層。
- Recently, he is working on one national project and two local project on biocompatibility and bactericidal properties for titanium nitride nanofilm and pyrolytic carbon materials. 現正承擔兩項天津市自然科學基金項目和一項國家自然科學基金項目，從事鈦陶瓷納米膜和熱解碳材料的生物相容性和抗菌性研究。
- The nitride layer was formed on the surface of ductile cast iron by gas multi-element penetration, and the phase structure and section appearance of nitride layer were analyzed by the XRD and SEM. 球墨鑄鐵經過氣體多元共滲后可在其表面形成氮化層,通過X射線衍射和掃描電鏡對滲層的相結構與形貌進行分析。
- Titanium nitride films were deposited on silicon(100) substrate at room temperature with various substrate bias voltages (corresponding to various impact energy) by energetic cluster impact (ECI). 在室溫下，以硅（100）為襯底，在不同的襯底偏壓（即團簇不同碰撞能量）的條件下，用荷能團簇碰撞沉積方法制備了TiN薄膜。
- In this paper, a quantitative friction measurement technique is introduced.The friction coefficients between a silicon tip and titanium nitride and diamond-like-carbon films have been obtained. 本文介紹定量摩擦力測量技術，并測量矽探針與氮化鈦及類鉆碳兩種硬膜的摩擦系數。
- Titanium nitride was obtained by the mixing technology with laser and plasma beams nitriding coaxially on the surface of titanium in atmosphere. 摘要采用激光和氮等離子體混合方法在大氣氣氛下對鈦樣品表面進行處理，獲得了鈦氮化合物表層。
- The result shows that the porosity of nitrided layer is due to the over concentration of CNO- in the salt bath. 試驗結果表明，滲層疏松主要是由于鹽浴內CNO－濃度過高所致；
- This paper deals with the kinetics of the ion nitrided layer growth for armco iron, steels 45, 40Cr, 42CrMo and 38CrMoAl. 本文研究了在不同離子滲氮工藝參數下,純鐵、45鋼、40Cr、42CrMo及38CrMoAl鋼等五種材料的離子滲氮層長大動力學,建立了長大動力學的數學模式。
- A Novel pH Electrode Based on Titanium Nitride 基于氮化鈦的全固態堿性pH電極的研制
- The fracture failure would occur in nodular iron crankshafts due to the over-shallow and non-uniform thickness of nitriding layer. 球鐵曲軸常常由于滲氮層薄、質量不穩定而引起斷裂失效,本課題研究了球鐵曲軸加氧滲氮工藝。
- Reducing discharge interval and increasing electric field intensity could increase the hardness and depth of nitriding layer markedly. 在本工藝條件下，適當減小放電間隙，增大電場強度，可以明顯提高滲層的硬度和深度。
- Keywords ionitriding;ion plating;titanium nitride; 滲氮;高子鍍;氮化鈦;
- Multi-Phase Titanium Nitride Inclusions 復相氮化鈦夾雜
