您要查找的是不是：
- The book also considers forming technologies for various composite material forms including thermoset and thermoplastic prepreg, molding compounds, and composite/metal laminates. 該書還認為成形技術，為各種復合材料的形式，包括熱固性和熱塑性預浸料，成型化合物，并復合/金屬層板。
- Bulk Molding Compound is specifically formulated for injection molding of automotive headlamp reflector applications. 玻璃纖維增強團狀模塑料，是為汽車車燈設計的特殊配方。
- Bulk Molding Compound with medium strength material with excellent moldability and moderate strength.Used in multi-purpose applications. 玻璃纖維增強團狀模塑料，中等強度和優異電性能，低成本，良好的成型性。廣泛應用于各種領域。
- EPBGA model consists of seven parts, they are heat spreader, molding compound, chip, substrate, thermal vias, solder ball and PCB board. EPBGA構裝體由七個部分所組成，分別為散熱板、成形樹脂、晶片、基板、熱通孔、錫球及印刷電路板。
- Compared with SMC, LPMC is an excellent kind of the sheet molding compound in respect of moulding pressure and equipment etc. 同片狀模塑料比較表明,低壓模塑料在成型壓力、設備等方面具有明顯的優勢,不失為優秀的片狀模塑料品種。
- glass reinforced thermoplastic molding 玻璃(纖維)增強的熱塑模制品
- Bulk Molding Compound with high strength material with excellent moldability and moderate strength.Used in multi-purpose applications. 玻璃纖維增強團狀模塑料，高等強度和優異電性能，低成本，良好的成型性。廣泛應用于各種領域。
- Tension and fatigue tests on a widely used packaging epoxy molding compound (EMC) were performed under room and high temperatures. 對在微電子封裝中應用很廣的環氧模塑封裝材料進行了常溫和高溫下的拉伸、疲勞實驗。
- Thermoset composites are available in Bulk Molding Compound (BMC) or Sheet Molding Compound (SMC), depending on the application. 根據不同的應用領域，我們提供團狀模塑料 (BMC)或片狀模塑料 (SMC)熱固性復合材料。
- In recent years compounding raw fiberglass directly into thermoplastic molded parts (LFT D) is growing rapidly in Europe and USA. 近年來 ,長纖維 熱塑性樹脂在線復合直接模塑制作熱塑性復合材料 (LFT D)在歐洲和美國發展很快。
- a polymer of propylene used as a thermoplastic molding material. 一種丙烯的聚合體，用作熱塑性鑄型材料。
- The product is a thermosetting molding compound, it is based on phenolic resin as a matrix and mixed with inorganic glass fiber, mineral filler and other additives. 本產品以酚醛樹脂為基材,加入玻璃纖維和礦物填料及其它助劑所制成的熱固性模塑料。
- The product is a thermosetting molding compound, it is based on phenolic resin as a matrix and mixed with organic fiber and mineral filler and other additives. 本產品是以酚醛樹脂為基材,加入有機纖維和礦物填料及其它助劑所制成的熱固性模塑料。
- This thesis considers the delamination behaviors between substrate and molding compound for Ball Grid Array (BGA) products caused by the plasma etching process. 中文摘要本文針對陣列錫球封裝產品基板和膠餅間所產生的分層作研究。
- This thesis researches to address the occurrence of delamination phenomenon between the interface of molding compound and the copper leadframe die paddle during assembly process. 中文摘要本論文主要針對銅釘架在經過封裝制程其本身與膠餅間所產生的脫層現象做研究。
- The method of polypyrrole (PPy) films being synthesized on the surface of insulating epoxy molding compound (EMC) electronic packaging materials and the shielding effectiveness of PPy film were studied. 研究了將導電聚吡咯(PPy)薄膜制備在絕緣環氧模塑料(EMC)電子封裝材料表面的方法,及導電PPy 薄膜的電磁屏蔽效能。
- The article has detailed the applications and developments of composites used in automobile, such as Fiber-reinforced plastics (FRP) , plastics blends, sheet molding compound (SMC) and so on. 本文詳細論述了纖維增強塑料、高聚物共混合金、片狀模塑料等復合材料的應用及其發展。
- Test Method for Spiral Flow of Low-Pressure Thermosetting Molding Compounds (08. 低壓熱固性模制化合物的螺線流的試驗方法(08。
- MgO was used to thicken the low pressure sheet molding compound and crystalline unsaturated polyester was grinded into powder to regulate the viscosity in cavity of hot mold in this process. 摘要采用氧化鎂為增稠劑、結晶樹脂以粉料形式加入而降低片材熱模內粘度的工藝，改進了對低壓片狀模塑料的增稠方法。
- The properties of dough molding compounds(DMC)/ACM composite were experimentally investigated. 試驗研究團狀模塑料(DMC)/丙烯酸酯橡膠(ACM)復合材料的性能。
