您要查找的是不是:
- This paper only details the processing of vectorization of metal layer images. 本文主要以集成電路芯片上的金屬圖形為例,來討論其矢量化過程。
- One should cover the resistance with metal layer, to avoid the damaged during the wafer level testing. 用金屬覆蓋電阻,避免wafer級測試時的損傷。
- The next step is to apply a metal layer on top of the embossed pits or wobbled groove. 下一個步驟是在塑料基片的浮雕坑型或擺動槽的上面覆蓋一個金屬層。
- The metal layer was described in distributing, thickness and visage by the method of EPMA. 利用電子探針?lè )治隽嗽诓煌瑮l件下 ;環氧樹脂表面所沉積的金屬層的形貌、表面成分和金屬沉積層厚度 .
- The thickness of metal layer can be confirmed by admittance loci illustrate method. 應用導納軌跡圖解方法,可以確定能誘導出濾光片最大透射率的金屬層厚度。
- Objective To study the clinical effects of expendable metallic stents (STENT) in the treatment of superior vena cava obstruction (SVCO) due to primary lung carcinoma. 探討上腔靜脈內支架(stent)置入治療原發性肺癌合并上腔靜脈梗阻(SVCO)的臨床療效。
- In the deep submicrometer design, with the increase of metal layer and the reduced width of line, the circuit performance and density have been improved greatly. 摘要集成電路設計進入了超深亞微米領域,金屬層增加,線寬減小,使電路的性能和密度都得到了很大的提高,但也引入了愈來愈嚴重的互連線效應,并最終引發了信號完整性問題。
- This paper introduced the sheet metal layered incremental forming process. 摘要本文介紹了金屬板材分層漸進成形技術。
- Effect of Nb and Cu metal layer thickness on microstructure and property of Si3N4/Nb/Cu/Ni/Inconel 600 joint[J].Transactions of the China Welding Institution,2005,26(7):54-58. Nb;Cu金屬層厚度對Si3N4/Nb/Cu/Ni/Inconel 600接頭組織和性能的影響[J].;焊接學報;2005;26(7):54-58
- FEM simulation of sheet metal layered forming process has been introduced. 介紹了金屬板料分層漸進成形過程有限元模擬。
- The first metal layer is formed with a plurality of first circuit layers through the patterning. 第一金屬層經圖案化而形成具有多個第一接墊的第一線路層。
- When voltage is applied to a metallic layer between the plates,it warms up and radiates heat to the room. 當電流通過玻璃板之間的金屬層時,加熱器升溫并將熱量向房間輻射。
- The display switches have three electrodes, at least one of which has three metal layers, the third of which is formed by nitrating the second metal layer. 顯示開關器件具有三個電極,它們中的至少一個具有三個金屬層,第三金屬層通過氮化第二金屬層而形成。
- Don't expend all your energy on such a useless job. 不要把你的精力全花在這無益的工作上。
- Copper, lead and zinc chiefly exist in sulfides or sulfo_arsenides and are concentrated in the metallic layer. 銅、鉛、鋅主要以硫化物和硫砷化物等存在,多富集在金屬層中。
- One should take the parasitic capacitance into account wherever one is making an overlap with metal layers or wells. 有覆蓋金屬層或阱區時,須考慮寄生電容。
- In the Great War soldiers were considered expendable. 在第一次世界大戰中,人們認為士兵是盡可犧牲的。
- Reflow Soldering: Melting, joining and solidification of two coated metal layers by application of heat to the surface and predeposited solder paste. 回流焊:應用加熱金屬涂敷層的表面和預涂焊膏,熔融,連接和凝固兩個金屬涂層。
- Crystal wamidh body substances the use of polyester metallizing layer stain, 10% of the microparticulate after pulverlizing, or pulverlizing with a special Flash fiber form. 結晶明滅體精神眾拔取滌綸噴鍍金屬層著色后保全不敗的微粒,或用出格明滅纖維保全后變不敗。
- She knows why the metal is the good conductor. 她知道金屬為什么是好的導體。