您要查找的是不是：
- Compared with SMC, LPMC is an excellent kind of the sheet molding compound in respect of moulding pressure and equipment etc. 同片狀模塑料比較表明,低壓模塑料在成型壓力、設備等方面具有明顯的優勢,不失為優秀的片狀模塑料品種。
- Thermoset composites are available in Bulk Molding Compound (BMC) or Sheet Molding Compound (SMC), depending on the application. 根據不同的應用領域，我們提供團狀模塑料 (BMC)或片狀模塑料 (SMC)熱固性復合材料。
- The article has detailed the applications and developments of composites used in automobile, such as Fiber-reinforced plastics (FRP) , plastics blends, sheet molding compound (SMC) and so on. 本文詳細論述了纖維增強塑料、高聚物共混合金、片狀模塑料等復合材料的應用及其發展。
- The polyurethone prepolymer was used as thickener to thicken hydrol-terminated unsaturated polyester, and a new sheet molding compounds (SMC) of unsaturated polyester was prepared. 采用聚氨酯預聚物作增稠劑對帶端羥基的不飽和聚酯進行增稠,制備出一種新型的不飽和聚酯片狀模塑料(SMC),并研究了其增稠性能、增韌性能及貯存穩定性。
- MgO was used to thicken the low pressure sheet molding compound and crystalline unsaturated polyester was grinded into powder to regulate the viscosity in cavity of hot mold in this process. 摘要采用氧化鎂為增稠劑、結晶樹脂以粉料形式加入而降低片材熱模內粘度的工藝，改進了對低壓片狀模塑料的增稠方法。
- In this paper,molding process for low-pressure sheet molding compounds thickened by crystalline unsaturated polyester was investigated. 對結晶不飽和樹脂增稠聚酯模塑料的中溫低壓模壓成型工藝進行了研究。
- low pressure sheet molding compound 低壓片狀模塑料
- A New Thickening System of Low Pressure Sheet Molding Compound 新型低壓片狀模塑料增稠方法的研究
- Research on Thickening Process of Low Pressure Sheet Molding Compound 低壓片狀模塑料增稠工藝研究
- unsaturated polyester sheet molding compounds UP-SMC
- Research on the Molding Parameters of Low Pressure Sheet Molding Compounds 低壓片狀模塑料模壓工藝參數研究
- sheet molding compound 片狀模塑料
- Research on the Thickening Mechanism of Crystalline Polyesters Using in Low Pressure Sheet Molding Compounds 低壓片狀模塑料中結晶樹脂的增稠機理探討
- sheet molding compounds 片狀模塑料
- Bulk Molding Compound is specifically formulated for injection molding of automotive headlamp reflector applications. 玻璃纖維增強團狀模塑料，是為汽車車燈設計的特殊配方。
- Our business lines are structured according to the product chain, from Bulk and Performance Monomers via Molding Compounds to Sheet Products. 我們的業務線是根據產品鏈,從大宗單體和功能性單體,到模塑化合物,到板材產品來構建的。
- From methyl methacrylate through performance monomers and molding compounds to sheet products, we also hold leading positions in the Americas. 從甲基丙烯酸甲酯到功能性單體、模塑化合物和板材產品,我們在美洲市場也占據了領先地位。
- Bulk Molding Compound with medium strength material with excellent moldability and moderate strength.Used in multi-purpose applications. 玻璃纖維增強團狀模塑料，中等強度和優異電性能，低成本，良好的成型性。廣泛應用于各種領域。
- EPBGA model consists of seven parts, they are heat spreader, molding compound, chip, substrate, thermal vias, solder ball and PCB board. EPBGA構裝體由七個部分所組成，分別為散熱板、成形樹脂、晶片、基板、熱通孔、錫球及印刷電路板。
- Bulk Molding Compound with high strength material with excellent moldability and moderate strength.Used in multi-purpose applications. 玻璃纖維增強團狀模塑料，高等強度和優異電性能，低成本，良好的成型性。廣泛應用于各種領域。
