您要查找的是不是：
- How is melt temperature controlled? 如何控制熔煉溫度?
- First, plot the temperature curve on the graph. 首先，在圖表上繪出溫度曲線來。
- He plotted a temperature curve . 他繪制了一條溫度曲線。
- The heat of fusion is the heat required to melt a substance at its normal melting temperature. 熔化熱是一種物質在其熔點溫度全部熔化所需要的熱量。
- Rather,it is a mixture of a large number of different substances,each with a different melting temperature. 相反它是一個很多不同物質的混合物，每種物質都具有不同的熔點。
- The molecular dynamics simulation method has been used to study the relation between the melting temperature and the cohesive energy of Pb nanofilms. 摘要本文利用分子動力學方法研究了鉛納米薄膜的熔化溫度與結合能的關系。
- Rather, it is a mixture of a large number of different substances, each with a different melting temperature. 相反它是一個很多不同物質的混合物，每種物質都具有不同的熔點。
- Solvent was used to decrease melting temperature and time of the resin during emulsification. 乳化中應添加助溶劑來降低萜烯樹脂的熔化溫度和時間。
- Liquid crystal display: Clapboard temperature curve, cry trapping temperature curve, sample temperature curve. 液晶顯示：隔板溫度曲線、冷阱溫度曲線、樣品溫度曲線；
- With the aid of GX High-Temperature Physical Function Determinator the melting temperature of coating was measured. 使用GX型-高溫物性測試儀測定焊條藥皮的熔點。
- The system design and the collection of temperature changes in temperature curve on the LCD display. 本系統設計了溫度采集且把溫度的變化曲線在液晶上顯示出來。
- Both the objective temperature curve and the practical temperature curve can be displayed on the CRT at the same time. 目標溫度曲線與實際溫度曲線能同時顯示在屏幕上。
- Apart from raising the barrel temperature what other techniques can be used to raise the melt temperature? 除了提高料管溫度外,還可以使用其他什么方法來提高融料溫度?
- Thermostats MCGS software used by A / D conversion of data collection, displayed on the monitor temperature curve. 恒溫采用MCGS軟件通過A/D轉換數據采集，在顯示屏上顯示溫度的變化曲線。
- Too low melt temperature: Inhomogeneous melt with cold material inside (Which cause empty parts, broken parts etc. 熔體溫度太低:材料塑化不均,熔體內含冷料(從而造成充模不足,冷料,產品斷裂等)
- The yield, molecular weight, polar comonomer content and melting temperature of the poly(olefin-ester)s can be controlled by the change of polymerization reaction condition. 改變聚合條件，可控制烯烴共聚酯的分子量、極性單體插入率和熔融溫度等性質。
- The temperature curve is shown as the following fig for reference. Such curve can effectively reduce the downflow of paste and avoid tin ball produces. 回焊溫度曲線乃因晶片元件及基板等的狀能，和回焊爐的型式而異，事前不妨多做測試，以確保最適當的曲線。
- In addition, jewelry alloys used in wax setting and casting must have the properties of low melting temperature, good fluidity and anti oxidization properties. 用于蠟鑲鑄造的合金應具有較低的熔點、較好的流動性及抗氧化性能等。
- By use of minimum quadratic multiplication the inflexion depth to temperature curve can determined that can interpret the vertical crack height. 通過逐一確定井溫曲線拐點達到確定裂縫高度的目的。利用最小二乘法可以確定井溫曲線拐點深度,從而可以解釋垂直裂縫高度。
- Its melt temperature is high and it has proper viscosity and low temperature flexibility. 具有較高的熔融溫度，適宜的粘度和良好的低溫柔韌性；
