您要查找的是不是：
- The results show when the triplex electro-hydraulic servo actuator system is applied, the dynamic performance has a little difference. 分析結果表明：伺服作動系統采用余度控制后，系統的動態品質基本不變。
- Xia Liqun , Zhang Xinguo.Development of DDV (direct drive valve) servo actuator[J ].Journal of Northwestern Polytechnical University,2006,24 (3) :308-312. (in Chinese) . [2] 夏立群;張新國.;直接驅動閥式作動器研究[J]
- Naslin. An algebraic method for the design of linear servo systems[J]. Control, 1996 (9) . 胡劍波.;多回路控制系統的標準系數設計法及其應用研究[J]
- This paper presents a linear servo tool holder system to cut workpieces with noncircular cross sections. 介紹了用于非圓截面零件車削的刀架系統。
- This paper presents a linear servo tool holder system to cut workpieces with non-circular cross sections. 介紹用于非圓截面零件車削的刀架系統。
- This paper presents a linear servo toolholder system to cut workpieces with non-circular crosssections. 介紹用于非圓截面零件車削的刀架系統。
- In order to improve the reliability of servo system, a triplex electro-hydraulic servo actuator system with three torque motors, three jet flapper valves and three sets of feedback components is designed. 摘要為了提高伺服作動系統的可靠性，設計了一種三余度的電液伺服作動系統，將伺服閥的力矩馬達、噴嘴擋板閥、系統的反饋元件等做成一式三份。
- Linear servo system driven by voice coil motor (VCM) is the key to realize CNC turning for workpieces with noncircular profile. 由音圈電動機驅動的直線伺服系統是實現非圓截面類零件數控車削加工的關鍵。
- This result proves that redundance control greatly improves the reliability of the servo actuator system, and provide the theoretical bases for the design of the servo actuator system with good performance. 結果表明：伺服作動系統采用余度技術后，系統性能基本不變，而大大提高了伺服作動系統的可靠性，為高性能伺服作動系統的研制提供理論依據。
- Selecting and setting of linear servo motor, length of the push rod, parallelism of the motor axis and the guide bar are the mechanical factors for shogging motion precision. 在機械結構方面，直線伺服電機的選型與安裝、頂桿長度、電機運動軸與梳櫛的平行度是橫移運動精度的主要影響因素。
- In order to enhance the tracking and robust performances of the linear servo unit in noncircular turning, the ADRC has been improved and used in the linear servo unit. 為了提高非圓車削中直線伺服單元的跟蹤精度和魯棒性,文章對自抗擾控制器進行了改進,并應用于直線伺服單元的控制中。
- Research on Mechanical-hydraulic Servo Actuator 機液伺服執行器的研究
- Conical-hydrostatic servo actuator 圓錐靜壓伺服作動器
- Electro-hydraulic servo actuator 電液舵機
- Permanent-magnet linear servo system 永磁直線同步電機
- permanent magnet linear servo motor (PMLSM) 永磁直線同步電機
- Design of Three-axle Linkage Positioning Based on DD Servo Actuator 基于DD伺服傳動器實現三軸聯動定位的設計
- permanent magnet linear servo motor(PMLSM) 永磁直線伺服電機
- STUDY ON RD VALVE SERVO ACTUATOR IN CONVERTOR FUME RECOVERY SYSTEM 轉爐煙氣回收系統RD閥伺服執行器的研究
- permanent-magnet linear servo systems 永磁直線伺服系統
