您要查找的是不是：
- Even for simple involute spur gear pairs, the geometry is hardly trivial, and the geometric complexity increases dramatically with helical, bevel and hypoid gears. 然而目前對于錐形齒輪齒根應力之理論計算上的研究較少，因此本論文之目的系針對直齒錐形齒輪建立齒根應力的解析計算模式。
- New method to calculate geometric parameters of hypoid gear pairs 準雙曲面齒輪副幾何參數計算新方法
- Gear pair with intersecting axes. 兩軸線相交的齒輪副。
- Latest generation speed reducing gear pair (high efficiency, low noise level). 最新一代減速齒輪對(高效,低噪音)
- The hypoid rough gear milling machine is the gear milling equipment to rough finish hypoid gear wheel. 準雙曲面齒輪粗切銑齒機是粗加工準雙曲面齒輪大輪的銑齒設備。
- The Hypoid gear transmission is the most complicated transmission.The p arameters of ma-chining are hard to cakulate. 準雙曲面齒輪是齒輪傳動中最復雜的,其工藝錐參數和加工調整計算都涉及兩個相錯圓錐的相切接觸條件。
- The integral type housing, hypoid gear design has the centerline of the pinion set above the centerline of the ring gear. 集成型的差速室、準雙曲面齒輪的設計中，小齒輪組中心線在環形齒輪的中心線之上。
- The cutters shape affects the hypoid gears face seriously. 加工刀具形狀對螺旋錐齒輪的齒面形成有很大的影響。
- Using the vibrate theory and finite element method of dynamic analysis, the dynamic reponse of the hypoid gear system is analyzed and predicted under the dynamic exciting. 摘要利用振動理論、動力分析有限元法，對準雙曲面齒輪系統在動態激勵下的動態響應進行了分析和預估。
- Some applied experiences on domestication field of high speed gear pair with special structure for large-scale refrigerator are recommended. 介紹了一種結構特殊的大型冷凍機高速齒輪副國產化方面的一些實用經驗。
- The overall coupled vibrate problem of the hypoid gear system was studied, which provides the theoretical foundation for the dynamic design of the hypoid gear system. 研究了準雙曲面齒輪系統的完全輻合振動問題，為準雙曲面齒輪系統的動態設計提供理論基礎。
- The crowned teeth gear circumferential restriction gear pair is an important part of the differential hydraulic motor with bevel gear transmission. 鼓形齒輪周向限制副是錐差式液壓馬達的重要部件,鼓形齒輪的加工質量直接關系到周向限制副的各項性能指標。
- A set of fundamental equations that consist of four formulae and contain seven pitch parameters is established through the pitch cone geometrical relationship of a pair of hypoid gears. 通過準雙曲面齒輪副的節錐幾何關系,建立了包含7個節錐參數并由4個方程構成的節錐參數基本方程組。
- Based on Genetic algorithm, the optimization of high tooth hypoid gear is developed, which could enlarge the tooth height without undercut and ensure thickness of tooth top. 遺傳算法是一種模擬生命進化機制的搜索優化方法,具有通用性好的特點,本文提出一種基于遺傳算法的高齒準雙曲面齒輪的優化設計方法。
- A mechanics model of a gear system is build and simulated in ADAMS based on the virtual prototype, in which gear pair is defined by curve-curve contact and friction is considered. 基于虛擬樣機技術,用ADAMS軟件建立了某型齒輪系統力學模型,進行了仿真研究,模型中用二維曲線-曲線接觸定義齒輪副約束,并計及了摩擦力的作用。
- Considering the torque fluctuation of the driving shaft and the existence of the backlashes in both gear pair and clutch, a lumped mass gear-rattling model is established. 在考慮主動軸驅動轉矩波動、齒輪副齒側間隙及離合器間隙的情況下,建立了同時含有離合器間隙和齒側間隙的齒輪傳動系統(簡稱雙間隙系統)拍擊振動分析的集中質量模型。
- The basic principle for the geometrical design of hypoid gears is introduced. 摘要介紹了準雙曲面齒輪幾何設計的基本原理。
- The rattling model of a one stage gear system is established,in which mass unbalance,speed fluctuation of driving shaft and backlash of the gear pair are considered. 在考慮不平衡質量、主動軸轉速波動及齒側間隙的情況下,建立了單級齒輪傳動系統的拍擊振動模型。
- The decelerator of precision fabrication, with the worm gear pair made of high-quality special alloy, guarantees the machine wear-resisting and ultra quiet. 精密加工制造的減速器，蝸輪副采用高品質特殊合金，保證整機耐 磨損、超靜音。
- Enumerates the several times of failure of JZ1406 gear pair, analyzes the explicit causes, calculates the load capacity and gives the corresponding solutions and repair measures. 針對主要外部原因,采取了齒輪平行度調整及安裝特制偏心瓦以調整嚙合側隙的有效檢修措施。
