您要查找的是不是：
- The wave propagation along axis direction in piezoelectric hollow cylinder is studied. 對壓電圓柱殼體內波的軸向傳播進行了研究。
- MIP of the dataset in the Z axis direction was computed and segmented as a mask. 正確地提取了血管并建立了幾何模型。本文提出用隨機森林進行多通道圖像的組織分類。
- The gimbal ring and drive axis is impossible to coincide with the centre axis of gyroscope completely during the assembly process. 摘要在動力調諧陀螺的裝配過程中陀螺和平衡環的中心軸總是不可能完全與驅動軸軸線重合，因此存在一定的安裝傾斜角。
- Other galleries give choices for data label position, category axis direction, and gridline patterns. 其他圖形目錄還可選擇數據標志的位置，分類軸方向和網格線模式。
- X-shaped region in the transmission axis direction of a polarizer or an analyzer appears in blackish color. 模具制品的應力及變形樣品明顯沒有應力，呈現與視野等同黑色樣品存在輕度應力，在樣品外圍呈現微弱白色。
- Thus, it is better to have the centre axis of gyroscope coincided with the gimbal ring and drive axis to reduce the influence to the dynamically tuned gyroscope. 因此，在裝配中應盡量做到陀螺、平衡環及驅動軸的軸線重合，以便減小對動力調諧陀螺的調諧條件的影響。
- Inset ceramic piece in over-feed fixes in two independent drive axis, which is used to control the tension of yarn precisely during the setting and winding. 嵌有陶瓷件的超喂固定在兩個獨立驅動的軸上，用于定型和卷繞時能精確的控制紗線漲力。
- Also, a dynamic measurement method of Young's modulus in principal axis direction for alaminae with orth-woven fibers was presented. 為說明動態法的有效性，作者還進行了鋁合金板材彈性模量和泊松比的動態和靜態測試。
- A twin screws roller refiner without knife can realize fibers ex tr uding in their axis direction in the commercial scale. 利用無刀式磨漿設備(雙螺旋輥式磨漿機)制漿,在工業上實現了纖維軸向擠壓。
- It also includes a retention mechanism which is adjustable and can be used for limiting movement of microscope platform along optical axis direction. 設置一與對焦裝置合作的可調整的阻擋機構，以便限制顯微鏡平臺沿光軸方向的運動。
- It was proved in the experiments that the growth rates in the axis direction for sucrose crystal during microwave irradiating are greater than those by conventional heating. 實驗證實，在微波環境中生長的蔗糖晶體之軸向生長速率比常規加熱方法的蔗糖晶體的生長速率大；
- STAR-CD software was used to simulate the difference between average volume temperature and interior wall temperature vs. time in axis direction aided by user subroutine programs. 基于STAR-CD軟件，通過編寫用戶子程序模擬出管中流體平均體積溫度與管內壁面溫度之差沿軸向的時間形。
- Control Technique of Shield Driving Axis 盾構推進軸線控制技術
- It adopts rotating hook driving axes as repairing structure which can ensure zigzag stitch evenly and without any fault. 采用旋梭驅動軸補償機構，可確保無故障與均勻一致的人字車縫。
- The problem of mirror motion compensation was studied for a geostationary satellite to eliminate the optical axis direction deviation due to attitude deviation and normal line deviation of the mirror. 摘要研究地球靜止軌道衛星的掃描鏡運動補償問題，以消除衛星姿態偏差和掃描鏡法線偏移引起的光軸指向偏差。
- He emphasized the importance of careful driving. 他強調小心駕駛的重要性。
- He was had up for dangerous driving. 他因危險駕駛而被控告。
- An end of a long axes direction of the claviform lens is an incidence face, and the other end is an irradiation face. 棒形透鏡放置在第1筒狀體中。棒形透鏡的長軸方向的一端為入射面，而另一端為照射面。
- The relationship between surface figure deformation(PV and RMS) and optical axis directions was gotten when the optical axis pointed to different angles. 對某光電經緯儀主鏡的結構進行研究,了解主鏡的支撐方式,分析了光軸不同指向時,鏡面的面形變化(PV值、RMS值)規律。
- Approximation Principal Axis Direction Method 近似主軸方向法
