您要查找的是不是：
- This paper dealt with the design of a high precision and digital measuring instrument of multimicro-ohmer. 介紹了高精度、數字式多量程微歐計的設計方法。
- The principle and technique of Rogowski current transformer, magneto-optic crystal current transducer, electro-optic voltage transducer and digital measuring system are described. 討論了羅柯夫斯基電流變換、磁光電流變換、電光電壓變換和數字量測系統的原理和技術。
- China National Measuring Science Research Inst 中國計量科學研究院
- F.Dickin, and M.Wang, “Electrical resistance tomography for process application,” Measurement Science &Technology, vol. 7, pp. 247-260, 1996. 洪瑞賢，區段人體組織成份之量測系統，國立成功大學/醫學工程研究所，碩士論文，2001。
- Synchronous sampling by software is commonly used in digital measurement of periodic electric signals. 軟件同步采樣是周期電氣信號測量中最常用的采樣方式。
- Aiming at the characteristics of MAF, the chapter research the method of processing route based on digitizing measuring data. 針對磁力研磨加工的特點，研究基于數字化測量數據的加工路徑生成方法。
- And therefor the research on digital measure technology is provided with theory and project signality. 因此,研究現代雷達的數字化測量技術具有重要的理論和工程意義。
- B. Lehmann, H. Nobach and C., Tropea, , 2002 “Measurement of acceleration using the laser Doppler technique,” Measurement Science and Technology 13, pp. 1367-1381. 李直諭，2005，“雙攝影機視覺系統應用于球高速飛行撞擊試驗之量測”，碩士論文，屏東科技大學，機械研究所，屏東。
- Digital Measuring System for Front Wheel Sideslip 數字式側滑儀
- K. Srinivasan, “Digital Measurement of Voltage Flicker,” IEEE Transactions on Power Delivery, Vol. 6, No. 4, October 1991, pp. 1593-1598. 江榮成，電力品質實務(一)，全華科技圖書股份有限公司，民國89年5月。
- To this end, the system for the digitizing measuring and CNC grinding of the radome inner surface was designed and developed. 為保證修磨精度，將內廓形的測量與修磨加工集成在一臺設備上，在一次裝夾下通過兩工位方式來實現測量與修磨加工。
- The Electron Physics Group has the mission of advancing measurement science for the determination of electronic and magnetic properties of nanometer-scale systems. Research Areas: Magnetic Nanostr. 美國國家標準與技術研究所電子物理研究組。
- A digital measuring system was firstly built to measure the robotic repeatability of point positions,track positions and track repeatability.The precision character istics were found out. 利用建立的數字化檢測平臺,測試機器人的點位置重復精度、直線軌跡位置精度和軌跡重復精度,找到其精度特性;
- In the paper a digital measure rotating speed,as an example,is introduced to describe the procedure of designing &simulating &realizing digital ASIC in detail. 本文以數字測速系統為例較詳細地介紹了設計、仿真和實現這一數字系統的全過程。
- Digital measurement of thickness was conducted by optical interferometry, assisted with a CCD camera to record fringes and a software package to analyze the fringes. 提出使用數字CCD拍攝光干涉條紋,使用圖像處理軟件進行灰度值掃描分析光干涉條紋的方法,對不透明薄膜進行光干涉法測厚。
- Abstract: The development of instrument is analyzed,the architecture of virtual instrument in the network days is discussed,and then the digital measurement is analyzed in detail. 文摘:分析了儀器發展的幾個階段，探討了網絡(luò )化時代的虛擬儀器體系結構，并對數字化測量作了詳細的介紹。
- And it has a good effect to use quasisynchronous sampling in the digital measure of common electrical parameter having the same accuracy of the synchronous sampling method. 并將準同步采樣算法應用于電工參數數字化測量中,具有良好的效果,與同步采樣具有相當的準確度。
- By using microprocessor technology, this system realized direct digit control (DDC) of the constant strain test, the constant revolution test, and digital measurement of testing parameters. 該系統運用微處理機技術實現了恒應變試驗、恒轉速試驗的直接數字控制(DDC)和試驗數據的數字測量。 文章闡述了系統的控制方式和功能模塊化的硬、軟件結構及設計要點,并對系統的功能、特點作出結論。
- Digital Measuring Instrument for Grain Moisture Content 數字式谷物水分測試儀
- The well-logging probe digitally measures flow velocity, temperature and pressure of mud and memorizes those data in the memory of the probe. 下井儀器沿井深對泥漿流速、溫度、壓力進行數字化測量，并將測量數據存儲在下井儀器內部的存儲器中。
