您要查找的是不是：
- PVC/ABS共混物PVC/ABS blend
- PA6／ABS共混物PA 6/ABS Blends
- PC/ABS共混物的結構和性能Structure and Properties of PC/ABS Blends
- PC/ABS共混物接縫強度的研究Study on the Weld Line Strength of PC/ABS Blends
- PVC/ABS共混塑料結構與性能的研究STUDIES ON THE STRUCTURE AND PROPERTIES OF PVC/ABS BLENDS
- 在PVC/ABS共混體系中添加第三組分配方的研究STUDIES OF THE PVC/ABS POLYMER BLEND MODIFIED BY THE THIRD COMPONENT
- 研究了茂金屬催化乙烯 丁烯 1共聚物mPE和LDPE共混物的流變行為 .The rheological behavior was studied for blends of metallocene catalyzed ethylene/1-butene copolymer(mPE) and low density polyethylene(LDPE).
- ABS共混改性modified ABS resin with mixed particles
- 靜態硫化共混物拉伸強度只有2MPa，而動態硫化共混物可達10MPa以上；the tensile strength of the statically vulcanized blend was only about 2 MPa,while that of the dynamically vulcanized blend could reach over 10 MPa;
- PC、PE和ABS共混研究STUDY ON THE BLENDING 0F PC,PE AND ABS
- PVC/SAN共混物PVC/SAN blends
- PC/ABS共混效果的研究The Study of the Mixing Effect of PC/ABS Blend
- 對以實驗室合成的PP-EPR二嵌段共聚物作為PP/EPT二元共混物的增容劑進行了探討。Much attention has been paid in recent years to the toughening of isotactic polypropylene (PP), and blending PP with ethylene-propylene terpolymer (EPT) is one of the most effective ways.
- 增容共混物compatiblization
- 注射工藝參數對PC-ABS共混材料沖擊強度和形態影響的研究The Influence of Injection Moulding Parameters on the Notched Impact Strength and Morphology of PC/ABS Blend
- 折衷共混物compromise blend
- 三元共混物tenary blend
- 由DSC測得共混物中IPP的結晶熔化熱Hc,Hc與PcBR含量無關。The crystalline melting heat H_c of the IPP in the blends is obtained by DSC, and H_c has no relation to the content of the PcBR.
- 熱固性共混物Thermoset blend
- 有機硅共混物[化] silicone alloy
