您要查找的是不是：
- PA56／TLCP共混物PA66/TLCP Blend
- PES/TLCP共混物的加工性能及其原位增強特性PROCESSING PROPERTIES AND IN-SITU REINFORCEMENT OF PEs/TLCP BLENOS
- 不舒服狀態
- 研究了茂金屬催化乙烯 丁烯 1共聚物mPE和LDPE共混物的流變行為 .The rheological behavior was studied for blends of metallocene catalyzed ethylene/1-butene copolymer(mPE) and low density polyethylene(LDPE).
- 靜態硫化共混物拉伸強度只有2MPa，而動態硫化共混物可達10MPa以上；the tensile strength of the statically vulcanized blend was only about 2 MPa,while that of the dynamically vulcanized blend could reach over 10 MPa;
- 共混物中PA66衍射峰的強度隨TLCP含量的增加而下降,(100)、(010)晶面間距分別從0.436 67 nm和0.371 39 nm增加到0.4414 nm和0.377 93 nm；WAXD showed that the crystallization of PA66 was inhibited by the presence of TLCP,the d(100) and d(010) increased from 0.436 67 nm and 0.371 39 nm to 0.441 4 nm and 0.377 93 nm,respectively.
- 對以實驗室合成的PP-EPR二嵌段共聚物作為PP/EPT二元共混物的增容劑進行了探討。Much attention has been paid in recent years to the toughening of isotactic polypropylene (PP), and blending PP with ethylene-propylene terpolymer (EPT) is one of the most effective ways.
- 增容共混物compatiblization
- 折衷共混物compromise blend
- 由DSC測得共混物中IPP的結晶熔化熱Hc,Hc與PcBR含量無關。The crystalline melting heat H_c of the IPP in the blends is obtained by DSC, and H_c has no relation to the content of the PcBR.
- 熱固性共混物Thermoset blend
- 有機硅共混物[化] silicone alloy
- 聚合物共混物Polymer blends
- 聚乙烯共混物polyethylene blends
- 共混物表面組成Surface composition
- 互穿網絡(luò )共混物interpenetrating polymer network
- EPDM／PP共混物EPDM/PP blends
- LDPE／SBR共混物LDPE/SBR Blend
- PA6／ABS共混物PA 6/ABS Blends
- PA6/PTFE共混物PA6/PTFE blends
