您要查找的是不是：
- IP子網IP subnet
- 使用虛擬接口,你可以設置一個以太網卡使其成為擁有很多IP子網的接口。Using virtual interfaces you can configure a single Ethernet card to be an interface to several IP subnetworks.
- 站點對象由一個或多個IP子網的集合構成。A site object consists of a set of one or more IP subnets.
- 子midnight
- IP子網一般被分配到路由器的每個網絡(luò )接口上。An IP subnet usually is assigned to each of the router\\'s network interfaces
- 與您的局域網(您的IP子網)相連的其他電腦上的“打印”對話框中會(huì )自動顯示您共享的打印機。Your shared printer automatically appears in Print dialogs on other computers connected to your local network (your IP subnet).
- 子網subnet
- 子網掩碼subnet mask
- 理想情況下,在現有環境中定義的路由組基于IP子網,可以清楚地反映Active Directory站點配置。Ideally, the routing groups that are defined in your existing environment are based on IP subnets and closely mirror the Active Directory Site configuration.
- 該路由器檢查包的IP地址，查找路由表，看看目的端點是否位于本地(物理位置)網絡(luò )，它通常叫做IP子網，The router inspects the packet's IP address and performs a route table lookup to see if the destination end station resides on the local (physically connected) network, typically called an IP subnet .
- 被屏蔽子網screened subnet
- 操縱子網operon network
- RBF子網RBF subsidiary network
- 子網規劃Sub-network planning
- 子網組播Subnet multicast
- 空地子網air/ground subnework
- 資源子網resource subnet
- 子網地址subnet addresses
- 子網連接subnetwork connection
- 子網失效[計] subnetwork failure
