您要查找的是不是：
- ANSYS有限元分析軟件ANSYS
- 結合Ansys有限元分析軟件建立了回轉窯支承組件的有限元分析模型,并對2號窯的支承組件進行了有限元數值計算。The finite element model of the supporting parts of No. 2 kiln has been established in ANSYS,and the numerical calculation has been carried out.
- 采用ANSYS有限元分析軟件對永樂(lè )大鐘及其懸掛支撐系統建立了有限元模型,進行了撞鐘過程有限元瞬態分析及動力強度校核。A global finite element model of Yongle Bell and its suspending and supporting system is established for the first time using ANSYS program.
- ANSYS有限元分析ANSYS finite element analysis
- ANSYS有限元軟件ANSYS finite element software
- 電渣熔鑄過程渣池電場溫度場的ANSYS有限元分析ANSYS Finite Element Analysis of the Thermoelectric Field of the Slag Basin for Electro-slag Casting Course
- ANSYS有限元模型ANSYS finite element model
- 有限元分析軟件software of finite element analysis
- 借助于A(yíng)NSYS有限元分析軟件,對巷道周?chē)鷳?chǎng)進行了三維數值模擬分析,并探討了超前鉆孔應力釋放預防巖爆的具體施工措施。By means of finite element analysis software ANSYS, The stress field around the tunnel was simulated and analyzed on the three dimension, and discussed the measure of stress release of bore hole to prevent rockburst in advance.
- 小孔法測量殘余應力時孔邊塑性應變的有限元分析及修正FEM ANALYSIS AND A CORRECTION ON PLASTICITY EFFECT AT THE HOLE EDGE WHEN USING THE CENTRE HOLE METHOD FOR MEASURING RESIDUAL STRESS
- 基于A(yíng)NSYS有限元分析的桿端關節軸承的結構優化設計Structural Optimization Design of Miniature Rod End Ball Bearing Based on ANSYS Finite Element Analysis
- 有限元仿真分析軟件中建模的多態機理研究Research on Multi-state Model and Its Application in Modeling of Finite Element Simulation Software
- 秸稈粉碎還田及殘膜回收聯合作業機的懸掛架有限元分析Finite Element Analysis on Suspension Frame of Field Straw Chopper Work with Mulch Film Collect Machine
- 鋼纜索節的有限元分析Finite Element Analysis of Steel Rope Clip
- 借助有限元分析軟件ANSYS建立框架的實體模型并進行受力分析;Two CFT frames were tested and the result was compared with the finite-element analysis for the verification for the model.
- 有限元分析技術finite element analysis technology
- 薄板點熱源加熱的有限元分析Finite element analysis of the point heat source heating a sheet metal
- 本文使用大型有限元分析軟件ANSYS5.7對國家大劇院結構進行了靜力分析。In this paper, the model of the Grand National Theater of China was analysized in static through the software-ANSYS5.71 based on the finite element theory.
- 有限元分析（FEA）finite element analysis (FEA)
- 有限元分析渦流效應Analysis of eddy current effect by finite element method
