您要查找的是不是：
- 水壓滑閥流場的CFD解析CFD Simulation on the Flow Field of Water Hydraulic Sliding Valve
- 閥芯運動過程液壓錐閥流場的CFD計算與分析Analysis and CFD Simulation of the Flow Filed in a Moving Poppet Valve
- 水壓滑閥流動特性可視化分析Visual Analysis on Flow Characteristics of Water Hydraulic Spool Valve
- 液壓錐閥流場的有限元法解析The finite element analysis of flow field for hydraulic poppet valve
- 用ANSYS對水壓錐閥流場的可視化研究Visualizing Pictures'Research of the Flow Field Inside the Water Hydraulic Poppet Valve by Using the ANSYS
- 可是,滑閥的瞬變流體結構由于其非穩定性的復雜所以有關的信息較少。However, there has been only a little amount of information about the transient flow structure in the spool valve because of the essential difficulty of its unsteadiness.
- 在進氣道-隔離段流場中求解了二維Euler方程,數值模擬了整個流場的波系結構。Moreover, a inviscid flow field of supersonic inlet-isolator was been obtained in order to simulate the complicated multi-wave structure by solve the 2D Euler equation.
- 基于CFD的錐閥流場解析與結構改造Flow Field Simulation and Optimization Design for Cone-valve Based on CFD
- 用CFD研究離心壓縮機葉頂間隙對內部流場的影響Application of CFD Researching on the Influence of Top Blade Clearance on Inner Flow Field of Centrifugal Compressor
- 根據參數生成數值柵格要素,它具有指定的范圍大小和數值,并輸入轉換流程。NumericRasterCreator Creates a feature with a raster of the specified size with a numeric value using the parameters supplied, and sends it into the workspace for processing.
- 進口節流式滑閥內流場的有限元計算與PIV研究FINITE ELEMENT NUMERICAL SIMULATION AND PIV INVESTIGATION OF FLOW FIELD INSIDE METERING-IN SPOOL VALVE
- 本文首先對混流式水輪機全流道內流場進行了多工況的CFD計算，得到不同工況下轉輪葉片表面水壓力載荷，并利用順序流固耦合方法對轉輪在各種工況下的應力特性進行計算。In this paper, at first the CFD simulation including the spiral case, stay vane, guide vane, runner vane and draft tube at different operation points is studied, then the result of the pressure distribution on runner blade is provided for the runner structural simulation by fluid-structure interaction (FSI) method.
- 高壓井控錐閥流場數值模擬研究Study on Oscillation of Valve Stem Induced by Fluid Flow in Popper Valve
- 姿控發動機內流場及高空羽流流場的DSMC一體化數值模擬The overall numerical simulation of both high-altitude plume flowfield and inflow region with DSMC method
- 水壓裂縫縫內流場的理論研究Theoretical Study of the Fluid Field within the Hydraulic Fracture
- 電液錘主控換向閥流場分析及結構優化Fluid Analysis and Structure Optimization of the Main-control Reversing Valve of Electro-hydraulic Hammer
- 非結構網格生成方法的改進及氣膜冷卻三維靜子流場的求解Improvement for Unstructured Grid Generation and Calculations of Three-Dimensional Turbulent Flow around Turbine Stator Blade Rows with Film Cooling
- 由均勻運動雙螺旋渦絲誘導的流場的解析解Analytical Solution of the Flow Field Induced by the Uniformly Moving Double Helical Vortex Filaments
- 高爐中心裝焦時煤氣、爐料流場的有限元法解析GAS FLOW AND SOLID FLOW ANALYSIS FOR CENTER COKE CHARGING IN BLAST FURNACE
