您要查找的是不是：
- 有限元軟件DEFORM-3DFEA software DEFORM-3
- 通過與有限元分析軟件DEFORM模擬結果的比較，計算結果吻合良好，驗證了該方法的可行性和有效性。By contrast to the simulated results of DEFORM, it is known that the two results coincide with each other well, which certifies the feasibility and validity of this method.
- 使用塑性有限元分析軟件deform對 640 0轉向節臂成形過程進行了模擬分析 ,找出了其在生產過程中出現的折疊、缺肉等問題的原因。The forming process of 6400 steering knuckle arms was analyzed by plastic FEM software Deform. The reasons causing the problems of fold and underfill in the production were found.
- 用SOLIDWORKS建立等通道轉角擠壓(ECAP)的幾何模型,用有限元軟件DEFORM-3D對不同摩擦系數、不同沖頭速度時的擠壓過程進行了模擬,獲得了相應的應變場以及載荷行程曲線,得到了模具的應力分布。A model of equal channel angular pressing (ECAP) is built up by SOLIDWORKS, the extrusion processes are simulated at various punch speeds and with different friction factor between workpiece and die using finite element method analysis software DEFORM-3D. The strain field, load-stroke curve,and stress distribution on the die are obtained.
- 有限元軟件FEM software
- ANSYS有限元軟件ANSYS finite element software
- 利用商業化軟件DEFORM-2 D,對所建立的模型進行了有限元分析 ,得到了切屑成形、溫度分布、切削力變化以及殘余應力等結果。The above FEM model is analyzed by commercial software DEFORM-2D, and some results including the chip formation, temperature distribution, cutting force variable and residual stress were obtained.
- ADINA有限元軟件ADINA finite element analysis
- 小孔法測量殘余應力時孔邊塑性應變的有限元分析及修正FEM ANALYSIS AND A CORRECTION ON PLASTICITY EFFECT AT THE HOLE EDGE WHEN USING THE CENTRE HOLE METHOD FOR MEASURING RESIDUAL STRESS
- 秸稈粉碎還田及殘膜回收聯合作業機的懸掛架有限元分析Finite Element Analysis on Suspension Frame of Field Straw Chopper Work with Mulch Film Collect Machine
- 鋼纜索節的有限元分析Finite Element Analysis of Steel Rope Clip
- 交疊非區配網絡(luò )雙調和方程協調有限元的構造及收斂性分析The Construction and Convergence Analysis of Conforming Finite Element Method for the Biharmonic Equation on Overlapping Nonmatching Grids
- 結果表明 ,有限元仿真是進行汽車護欄碰撞研究的有效方法。The results indicated that the finite element analysis is a efficient research method to guardrail design and occupant protection.
- 有限元程序描述語言開發的月牙肋內加強鋼岔管有限元軟件GCGFEM Software GCGFEM made by limited element program language for analysis on steel fork pipe reinforced by crescent moon rib
- 動力有限元dynamic finite element
- deform有限元分析系統軟件及其應用Application of Deform Limited Liability Analysis System Software
- 顯式有限元explicit finite element
- 薄殼有限元finite element
- 有限元軟件ANSYSfinite element analysis software Ansys
- 有限元插值finite element interpolation
