您要查找的是不是：
- Selecting cast aluminum alloy and cast steel as inner loop and outer loop of the bimetal compound casting respectively, the casting was produced by induction heating in mold. 雙金屬復合鑄件外圈采用鑄造鋁合金,內圈選取碳素結構鋼,采用型內感應加熱工藝進行復合。
- The PIC tube is made of long,internally deburred electrical weld tube or seamless steel tube by means of induction heating,stretch reducing and hot coiling. I C管采用長的去除內毛刺的電焊管或無縫管作為坯管，經感應加熱后進行張力減徑，然后熱卷曲成卷。
- The magnetic signals are sensed by induction coils. 磁信號由感應線圈所檢測。
- How to build inductive heating &welding machines step by step? 如何一步一步的來設計感應加熱設備和焊機?
- To produce(an electric current or a magnetic charge) by induction. 感應通過感應而產生（電流或電磁）
- The nucleation rates as indicated by induction period are measured. 測定了以誘導時間表示的成核速率。
- hot elbowing by inductive heating 中頻加熱彎管
- Nomura Giko manufactures superheated steam generation devices powered by electromagnetic induction heating. 通過電磁誘導加熱制造生產過熱蒸汽發生裝置。
- A basic model was built for the induction heating detacher by the ANSYS finite element analysis(FEA) software. 通過ANSYS有限元軟件，構建了感應拆卸器的基本模型。
- Microstructure and Properties of 20CrMo Oil Pump Arm Quenched and High Temperature Tempered by Induction Heating with Series Inductors 20CrMo抽油桿串聯感應加熱調質后的組織與性能
- The formation of weld microstructure in inertia friction welding by was studied mans of microscope,SEM and TEM. 利用光學顯微鏡、掃描電鏡、薄膜透射電鏡研究了慣性摩擦焊縫組織的形成。
- The application of the induction heating technology by variation of power and moving speed for quenching pinion was introduced. 介紹了變功率、變移動速度感應加熱淬火技術在小齒輪高頻淬火中的應用。
- To infer by inductive reasoning. 歸納通過歸納的方式去推理
- The shell is welded by steel pate. 外殼為鋼板焊成。
- How to improve the reliability of inductive heating & welding machines? 如何來提高感應加熱設備和焊機的可靠性?
- The shell is welded by steel pate . 外殼為鋼板焊成。
- The induction heating lessens the influence of these processing parameters. 掃描速度和送粉速率對界面形態的影響隨感應能量增加而減弱。
- It takes only two to four irradiations to inspect a sealing head weld by using the technology. 使用這種方法，一般只需兩到四次透照就能完成封頭焊縫的探傷。
- In this paper, measures to decrease the tensile strain of weld by heating the base metal near the Brittle Temperature Range (BTR) with an auxiliary heat source are described. 本研究通過輔助熱源加熱脆性溫度區間附近的母材金屬使之膨脹以減小焊縫所受的拉伸應變。
- It’s commonly and viably to improve the officinal factors by induction of polyploidy. 誘導多倍體能夠提高藥用植物藥用成分的報道屢見不鮮，這種方法切實可行。
