您要查找的是不是：
- Injection process has a great influence on this new type of combustion. 在這種新型燃燒方式中，噴霧過程是重要的影響因素。
- Make proposals of the piece design in order to optimize the injection process. 提供產品設計建議來優化注塑工藝;
- The cored wire injection process was used to produce vermicular cast iron. 應用喂絲工藝生產蠕墨鑄鐵。
- Be responsible for analysis problem-solving of encapsulation injection process. 負責注塑工藝問題發現，分析及解決。
- The best deoxiding conditions and the deoxidant which is used for the vapor injection boiler in oil fields will be confirmed by the effects of the variables on sodium sulfite deoxidization. 作者從靜態方面測量一些變量對亞硫酸鈉除氧效果的影響,來確定適用于油田注汽鍋爐除氧的最佳條件和除氧劑。
- The quality control of cored-wire injection process used for production of as-cast ferrite nodular iron was described. 摘要介紹用喂線球化工藝生產優質鑄態鐵素體球墨鑄鐵的質量控制要點。
- HU Shengteng, FU Weibiao, XING Guiju.An Investigation of the Influence of Water Vapor Injection on Soot Formation During Liquid Fuel Pyrolysis. Journal of engineering for thermal energy and power. 胡升騰,傅維鑣,邢桂菊。水蒸氣對液體燃料高溫分解炭黑形成影響的研究。熱能動力工程。
- Abstract: The best deoxiding conditions and the deoxidant which is used for the vapor injection boiler in oil fields will be confirmed by the effects of the variables on sodium sulfite deoxidization. 文摘:作者從靜態方面測量一些變量對亞硫酸鈉除氧效果的影響,來確定適用于油田注汽鍋爐除氧的最佳條件和除氧劑。
- It is not applicable that sodium sulfite is used alone as the deoxidant for the vapor injection boiler in oil fields.because of the high remains of sodium sulfite and the severe acid erosion in the water. 若單獨用硫酸鈉作除氧劑，則因水中亞硫酸鈉的殘余量高，產生嚴重的酸腐蝕，而不適用作油田注汽鍋爐除氧劑。
- Working experience: 2-3years, experience with injection process control is preferred. 具有2-3年工作經驗,具有注塑流程控制經驗者優先。
- Abstract： The best deoxiding conditions and the deoxidant which is used for the vapor injection boiler in oil fields will be confirmed by the effects of the variables on sodium sulfite deoxidization. 摘 要： 作者從靜態方面測量一些變量對亞硫酸鈉除氧效果的影響,來確定適用于油田注汽鍋爐除氧的最佳條件和除氧劑。
- The injection process works by prematurely terminating a text string and appending a new command. 注入過程的工作方式是提前終止文本字符串,然后追加一個新的命令。
- The research is to apply FBGs to the injection molding by imbedding it right into the injection process. 本實驗將光纖光柵于塑膠射出成型的澆注制程時，直接將光纖光柵埋到產品中。
- The flow fields of the injection process and the plastication process are discussed in det... 重點討論了注射和塑化兩個過程的流場。此研究工作可為注塑螺桿設計提供理論依據。
- A cloud is a mass of vapor in the sky. 云是天空中的水汽團。
- The result showed that excellent and stable vermicularizing effect could be obtained by using cored-wire injection process to produce vermicular iorn. 結果表明,喂絲法生產蠕墨鑄鐵,蠕化情況良好,蠕化率穩定。
- The effluent water increases slowly at the beginning of nitrogen injection process, then increases at a great speed sharply before gas breakthrough. 當氣體注入壓力一定時，液體流出量緩慢增加，氣體突破之前伴隨液量的突然增大；
- The principle,injection process and parameters of moulding for the super miniature and high precision optical pickup unit(OPU)in a laser head were presented. 介紹了激光頭中的OPU零件注射成型的原理、注射工藝和與其相關的工藝參數,分析了OPU零件的生產工藝,論證OPU零件的注射成型技術的可行性。
- The formula of sulphoaluminate "S" instant-setting cement eusd in shut-off is introduced. The design of conducting and borehole sweeping tools and injection process are described. 介紹了硫鋁酸鹽“S”型瞬凝水泥干法堵漏時使用的配方，闡述了輸送工具和掃孔鉆具的設計以及灌注工藝技術。
- The characteristics of the injection process for PMMA material are analyzed.A measure for design of the injection mould for the PMMA magnifiers is introduced. 分析了有機玻璃的注射工藝特點,并針對放大鏡產品注射模設計中所采取的措施進行了介紹。
