您要查找的是不是：
- VMCV Vacuum Modulator Check Valve 真空調節器止回閥
- Connect vacuum hose to booster check valve. 連接真空軟管到增壓器檢測閥。
- Connect vacuum hose to booster check valve . 連接真空軟管到增壓器檢測閥。
- Check valve guiding shall be plastic to plastic. 止回閥引導裝置應該是塑料對塑料。
- Remove check valve and valve seal from booster. 從倍力器上卸去逆止閥和閥門密封。
- To test for tightness of second check Valve. 檢測第二止回閥的密封性。
- VMVS Vacuum Modulator Valve Switch 真空調節器閥開關
- ANSI FLANGED SWING CHECK VALVE CLAS. 美標法蘭止回閥。
- Reassemble the Check valve modules. 重新組裝止回閥模塊。
- Purpose: To test check valve No. 1 for tightness. 目的:檢測止回閥1號的密封性。
- Sticky outlet check valve poppet. 1檢查過濾的進水管線。
- CAUTION: The check valve spring is in compression. 警告：止回閥彈簧處于壓縮狀態。
- The TK-DL can test pressure vacuum breakers, reduced pressure backflow preventers or double check valve assemblies. TK-DL可以檢測壓力真空斷路閥，減壓防回流閥或雙止回閥總成。
- Two independent check valves with intermediate vacuum breaker and relief vent. 兩個獨立止回閥配置中間真空斷路閥和安全閥。
- SAVM spark advance vacuum modulator 點火提前真空調制器
- Remove the four screws holding the first check valve cover. 拆卸固定第一止回閥閥蓋的四個螺絲。
- EGR-VM Exhaust Gas Recirculation Vacuum Modulator 廢氣再循環真空壓力調節器
- A check valve may be required ahead of the backflow preventer. 此時在防回流閥前面可能需要安裝一個止回閥。
- Service the second check valve using steps 2 through 12. 按照第2步至第12步維修第二止回閥。
- Use a check valve to prevent reverse flow into the cylinder. 采用止回閥,防止回流入鋼瓶。
