您要查找的是不是：
- The unit cell of such a pattern. 晶胞這種結構的單位細胞。
- The crystal system of SPG-l-P was monoclinic unit cell. SPG-1-P的高級結構為：SPG-1-P主要由C_6H_(12)O_6晶體組成，并含有一定量的非晶體成分。
- The truss model of unit cell is developed based on non-continuum mechanics,and finite element method is utilized to predict the effective elastic modulus of composites. 基于非連續介質力學方法建立桁架結構單胞模型,采用有限元法預估復合材料的有效彈性模量,以材料質量最輕和剛度要求為目標,選用遺傳算法優化細觀結構參數。
- The load-transmission function method (LFM) coupled in the unit cell concept was used to study the behavior of pile-soil composite ground under embankment load. 摘要采用傳遞函數法和單元體相結合的方法研究路堤荷載下樁土復合地基的性狀。
- Meanwhile, felting cell method is advanced to improve the calculation p... 實例表明,所提方法很好地解決了實際模擬計算過程中的關鍵技術問題。
- How strongly each scatters is determined by what is inside each unit cell. 各個散射的強度則由每個晶胞內有什么來決定。
- The R1 value determined by the new method can be well correlated with E-cat unit cell size and acid site density, and is consistent with the product distribution obtained from fixed fluidiz... 該方法得到的R1值與催化劑的平衡晶胞、酸中心密度有較好的相關性,與固定流化床的結果相比,趨勢基本一致,可用于預測裂化催化劑上反應所得催化裂化汽油的質量。
- This IC design system applicable to the standard cell method is an automatic layout system used for designing Application Specific ICs (ASIC). 采用標準單元方法的集成電路設計系統是一個用于專用集成電路（ASIC）設計的自動布圖系統。
- The unit cell parameters of Fe-B substructure are a = 7.08 A , cFe= 3.91 A, and the space group is P/4_2/mcm. Fe-B亞結構晶胞參數為a=7.;08A;c_(Fo)=3
- An advanced unit cell model was put forward to evaluate the settlement of deformable pile under flexible foundation. 摘要為了分析柔性基礎下柔性樁復合地基的沉降問題，提出了改進的單元體位移模型。
- X-ray diffraction showed that the tetragonal structure(I4/mmm)is retained but that the unit cell volume is slightly increased. 利用 x 射線衍射和磁測量研究了 RTiFe_(11)N_x 的晶體結構和內稟磁性.;x 射線衍射表明 RTiFe_(11)N_x 仍保持 RTiFe_(11)的四方結構(I4/mmm)
- In one implementation the photodiodes within each unit cell are essentially identical photodiodes but with different exposure times. 在實行中，每單位晶胞內的光電二極體基本上為相同的光電二極體，但卻具有不同的曝光時間。
- A unit cell model is established on the pattern of the rule of the yarn movement and the relationship between the braiding parameters is deduced. 在三維六向編織物紗線運動規律的基礎上,建立了單胞模型,推導了編織參數之間的數學關系。
- Chapter three introduces a new method to generate the hexahedral anisotropic unstructured Cartesian grids named adaptive layered Cartesian cut cell method (Adaptive layered method). 第三章提出了基于自適應變層厚笛卡爾切割單元法(本文中簡稱為變層厚法)的復雜區域非結構化各向異性笛卡爾網格生成方法。
- Aiming at the difficulty of the visualization for the complex geometries physical field, this dissertation presents a theory of visualization based on adaptive layered Cartesian cut cell method. 本文針對復雜區域物理場可視化目前存在的問題，研究了基于自適應變層厚笛卡爾切割單元法的復雜區域物理場數值模擬與可視化技術。
- In this model, axial yarns, braider yarns and resin were treated as spatial beam elements.Each unit cell is then treaded as space truss. 其中，軸紗、編織紗和基體均被視為兩端鉸接的空間桿單元，復合材料用離散的桿單元組成的桁架結構代替。
- The mechanical behavior of Zircaloy-4 sheets after hydridization can be predicted well by the circle plate unit cell model. 發現氫化物具有一定的塑性變形能力，與其在Zr-4合金中的形貌直接相關；
- An extension of Finite Cell Method (FCM) is presented, which was used to simulate mass transport process in porous media with unhomogeneous porosity. We also gave two numerical examples here. 摘要對有限顆粗法(FCM)進行了推廣，將FCM用于模擬二維變孔隙率下多孔介質中污染物運移情況，并給出相應的數值算例。
- An extension of Finite Cell Method(FCM) is presented,which was used to simulate mass transport process in porous media with unhomogeneous porosity.We also gave two numerical examples here. 對有限顆粒法(FCM)進行了推廣;將FCM用于模擬二維變孔隙率下多孔介質中污染物運移情況;并給出相應的數值算例.
- The higher structure of SPG-l-P was mainly composed of fiber sugar (C6H12O6) crystal and contained some non-crystal. The crystal system of SPG-l-P was monoclinic unit cell. SPG-1-P的高級結構為：SPG-1-P主要山C_6H_(12)O_6晶體組成，并含有一定量的非晶體成分；
