您要查找的是不是：
- The hardware design and control tactic of the position servo system. 介紹了系統的硬件設計及控制策略。
- You may have your choice between these two positions. 在這兩個職位中,你有權選擇其一。
- Electromechanical Position Servo System (EPSS) is a kind of automatic system used widely. 機電位置伺服系統是一種應用極為廣泛的自動化系統。
- This paper presents a digitized DC motor position servo control system based on DSP. 提出一種基于數字信號處理器（DSP）的全數字直流位置伺服控制系統。
- DC motor position servo system is an important component of the digital speed governor system utilized on natural gas engine. 直流電機位置伺服系統是天然氣發動機電子調速系統的關鍵組成部分。
- At last, it establishes RBF neural network based on the electro-hydraulic position servo system, and the results prove the description hereinbefore. 最后以仿真電液位置伺服系統為例,建立相關的RBF網絡(luò ),驗證以上的陳述。
- The difference in longitude between two positions as a result of a movement to the west. 經度差因為向西的運動而產生的兩個位置之間的經度上的差別
- Based on the Permanent-Magnet Synchronous Motor(PMSM) vector control,the control of position servo system is achieved by using repetitive control(RC). 在永磁同步電機矢量控制的基礎上,利用重復控制策略對位置伺服系統進行了控制。
- The equivalent load observed is fed back for resisting force load disturbance and raising the accur acy of the hydraulic position servo control. 利用觀測出來的等效負載進行反饋控制，抑制力負載干擾的影響，提高液壓位置伺服控制的精度。
- The support of long shafts at more than two positions. 在兩個以上位置支撐長軸。
- This paper proposes a position servo system based on digital brushless DC motor using TMS320LF2407A Digital Signal Processor (DSP). 摘要基于TMS320LF2407A，建立了無刷直流電機全數字控制系統。
- Points P and Q represent two positions of the particle. P點和Q點分別表示該質點的兩個位置。
- This paper proposes a state feedback control strategy with a neural network compensator,which is applied in a hydraulic position servo system. 提出一種具有神經網絡(luò )補償的狀態反饋控制方法并用于液壓伺服位置控制系統。
- In the paper,stepping position servo system is introduced in the thesis,and the system s controlling scheme and its structure are analyzed detailedly. 詳細地分析了步進式位置伺服系統控制方案及其軟硬件結構設計。
- The 16-bits single-chip computer (89C196KC) and resolver are used to realize the position servo control of antenna pointing system. 系統采用89C196KC單片機和多極旋轉變壓器實現了衛星天線指向系統的位置伺服控制。
- If a proper RC feedback network is added to a schmitt trigger, we can get a two position (on-off) automatic controller with PID action. 如果在斯密脫觸發器上加上一個適當的RC反饋電路,就能得到一個兩位式(開關動作)PID調節器。
- Two negative charges repel each other ,and so do two positive charges . 兩個負電荷相斥，兩個正電荷也是如此。
- A DC position servo controller used for the laser machine CNC system is introduced which is based on a 80C196 single chip mleroprocessor and made on the industrial PC bus board. 本文介紹一種用于激光加工數控系統的工業PC總線模板式80C196單片機直流位置伺服控制器。
- Two negative charges repel each other, and so do two positive charges. 兩個負電荷相斥，每個正電荷也是如此。
- The ASCO 8401 Series is a two position, three-way or four-way solenoid piloted valve is designed for air actuated service. ASCO 8401系列之一種兩位，三通或四通電磁導向閥，設計用于氣動執行機構。
