您要查找的是不是：
- XE--- Rack shift coefficient for adjustment of tooth thickness. 按照字面是：調節齒厚的齒條位移系數。
- There is no common normal in the conical involute gear and the fixed chordal tooth thickness can not be measured accurately because of the coexistence of helix angle and taper. 漸開線錐形齒輪由于同時存在錐度和螺旋角,使得其固定弦齒厚無法精確測量,也沒有公法線。
- XE --- Rack shift coefficient for adjustment of tooth thickness . 按照字面是：調節齒厚的齒條位移系數。
- Nominal Clearance is the actual space width of an internal spline minus the actual tooth thickness of the mating external spline. 理論側隙：理論側隙是內花鍵的實際齒槽寬減去與之相互配合的外花鍵的實際齒厚所得的值。
- Deviation measurement of tooth thickness and conical point of straight bevel gear by using steel bail was studied and approached. 對鋼球法測量直齒圓錐齒輪齒厚及錐項位置誤差檢測進行了研究和探討。
- While the half angle increases, velocity gradient in a microdiffuser decreases and so does the average vorticity. 此外，受到流道內部速度梯度降低的影響，平均渦度值會(huì )隨半角增加而下降。
- The results of simulation and machining test show that the spatial loop tool path can work with high efficiency when the size of normal tooth thickness is small. 仿真結果和數控機床試切結果表明，當轉子法向齒厚尺寸較小時，采用空間環形走刀方式效率較高且能保證精度；
- The modifications of gear tooth profiles like tooth thickness, tooth tip and edge chamfers and root fillet radius are easily manipulated in a editing window. 如齒厚，齒尖和邊緣倒角及根圓角半徑齒輪齒廓的修改很容易操縱的編輯窗口。
- Tooth Thickness Specification and Measurement 齒厚度規范和測量
- constant chordal tooth thickness measurement 固定弦齒厚測量
- entry natural converging half angle 入口自然收斂半角
- chromium-plated tooth thickness calipers 鍍鉻鑲合金齒厚卡尺
- median diameter normal tooth thickness 中徑法向齒厚
- transverse chordal tooth thickness 橫向弦齒厚
- My heart beat thick in the course of the interview. 在面試過程中我的心跳得厲害。
- I apportioned half the property to each of them. 我把財產的一半分配給他們各人。
- She reckoned she had cut her cost by half. 她估計她減少了一半的費用。
- I worried half the night and have a fitful sleep. 我半個晚上都一直在擔心，故而時醒時睡。
- He can fling off a poem in half an hour. 他可以在半小時之內草就一首詩。
- It took him half an hour to finish the work. 他花了半個小時做完這項工作。
