您要查找的是不是：
- In electronics,the process of synchronizing a repetitive signal source with timing signals. 在電子技術中，使一重復信號源與同步[定時]信號同步的處理方法。參閱clock。
- In electronics, the process of synchronizing a repetitive signal source with timing signals. 在電子技術中,使一重復信號源與同步(定時)信號同步的處理方法。
- Let's set the clock by the radio time signal. 咱們照著收音機的報時信號把鐘對一對。
- I corrected my watch by the time signal. 我按報時信號校正我的表。
- Simple Signal Source based Micro Controller. 單片機簡易信號源。短句來源。
- I've just set my watch by the radio time signal. 我剛按電臺的報時信號撥了表。
- I set my watch by the time signal on the radio. 我根據電臺的信號,對手表。
- He set his watch by the time signal. 他按報時信號校準他的表。
- I have just setting my watch by the radio time signal. 我剛按電臺的報時信號撥了表。
- I often set my watch by the time signal in the telephone. 我常常按電話里的報時信號對表。
- Time clock signal source directly fetches from clock signal of PCI bus in the computer system or signal generator, which can generates high frequency time clock signal. 該時鐘信號源直接取自于該電腦系統中PCI總線的時鐘信號或是一可產生高頻時鐘信號的時鐘信號產生器，用以供應該計數電路所需的輸入時鐘信號。
- in electronics,the process of synchronizing a repetitive signal source with timing signals 在電子技術中，使一重復信號源與定時信號同步的處理方法
- Discrete time signal(sinusoid) must satisfy N*Ts = qT to be perioic . 一個連續的正弦周期信號，抽樣產生的離散信號不一定還是周期信號。
- There will be some impedance mismatching between the signal source and the load. 阻抗之間會(huì )有一些不協調的信號源和負載。
- In an ideal amplifier, the final stage tube acts as a signal source and the output transformer acts as a load. 在一個理想放大器,最后階段管作為信號源和輸出變壓器的負載。
- Just the signal source and the load on the DC loop should share the signal power. 作為信號源和負載的直流回路功率應分擔信號。
- If you have two tuners that support FM radio, be sure each tuner is connected to its own FM radio signal source. 如果有兩個支持調頻廣播的調諧器,請確保每個調諧器都已連接到各自的調頻廣播信號源。
- A six-pip time signal is sent to Radio Television Hong Kong for broadcast at quarter-hour intervals. 每隔15分鐘，6響報時信號便會(huì )經由香港電臺轉播。
- We can local the EHG signals source more easily by using this new electrode. 同時,提出了一種新型的有源拉普拉斯的電極的設計,為將其應用于臨床EHG信號檢測做準備。
- The signal source is represented by VS andRS, the shuntcapacitance isCSHUNT, and the measured voltage is VM. 電壓源由VS和RS來表示，分流電容為CSHUNT,測量的電壓為VM。
