您要查找的是不是：
- One thermocouple is required per thermowell. 每個熱電偶套管需要一個熱電偶。
- The technology of bolometer will be a new industry in nextdecade. 測輻射熱計技術有望在下一個十年發展成為一門新的產業。
- They should be checked frequently against a standard thermocouple. 它們經常要用標準熱電偶來校對。
- Temperature: Display the temperature reading from the thermocouple. 溫度:根據熱電偶指示溫度。
- Thermocouple tip must touch the end of the thermowell. 熱電偶頭必須碰到熱電偶套管的頂部。
- Can also custom specifications, various types of thermocouple. 還可以定做各種規格，各種類型熱電偶。
- It also presents a method of making a thermocouple thermometer. 闡述溫度測量的基本原理、類型,并對熱電耦溫度計進行試制作。
- Thermocouple is a usual temperature measuring component. 摘要熱電偶是常用的測溫元件。
- The temperature is sensed by a thermocouple located in the vapour space. 該溫度由位于蒸氣空間的熱電偶所測出。
- The transmitter is wired for up-scale thermocouple burn-out protection. 變送器上殼連有熱電偶燒毀保護接線。
- The simplest version of the thermocouple gage consists of a resistance wire. 最簡單的熱電偶真空計是由電阻絲組成。
- Controller automatically turns off heater if thermocouple fails or disconnects. 當熱電偶發生故障或未連接時,控溫儀將自動關閉加熱器。
- The use of other types of thermocouple elements require approval by SECCO. 其它類型的熱電偶元件的使用要得到賽科的批準。
- There are static error and dynamic error in the measurement of thermocouple. 熱電偶的測溫存在靜態誤差和動態誤差。
- A mechanical or alloyed contact between different metals or other materials,as in a thermocouple. 接觸在熱電偶中，不同的金屬或其它物質之間機械的或摻雜的接觸
- A device of measuring the crystallization temperature of mold slag based on single thermocouple wire was introdued. 筆者以保護渣結晶溫度為出發點，提出了一種將雙鉑銠熱電偶絲既作為加熱元件，又作測溫元件的熱絲法技術。
- Is there evidence that each thermocouple ball was bonded to a board joint using Hi Temp. Solder or Conductive Epoxy? 是否有證據表明所有的熱電偶都是在高溫下用錫或導電環氧物連接到板子上的?
- A thermocouple made of platinum/platinumrhodium provides the accurate temperature sensing. 由鉑或鉑銠組成的熱電偶給出精確的溫度指示。
- Special features like machining to install sensors or thermocouple holes are available on request. 我們可按照客戶要求配置特別功能,例如通過機加工在軸承座上增加安裝傳感器或熱電偶的孔。
- A thermocouple is attached to the sample from above, to give a direct measurement of the temperature. 熱偶從上面伸向試樣，給出溫度的直接測量。
