您要查找的是不是：
- Oil is put in machinery to reduce the friction. 把油涂到機器上減少摩擦。
- Question: How about the friction in northern China? 問：華北的磨擦問題怎樣?
- The ball bearings reduce the friction on the joint. 滾珠可以減小結合處的摩擦。
- The clutch is a standard dry friction type sized to tolerate the forces required to close the clutch rapidly. 離合器為標準型干摩擦式，其尺寸由快速合上離合所需要的力的大小決定。
- Friction type and wearing in punch ing have been introduced with proposal method of re ducing fric tion and preventing wearing. 介紹沖壓過程中的摩擦類型與磨損,提出了減少摩擦、防止磨損的方法。
- Fill lube to the frictional parts termly. 摩擦部分應定期加注潤滑油。
- The purpose of lubrication bearings is to reduce the friction. 潤滑軸承是為了減少摩擦。
- The object of using ball-bearings is to reduce the friction. 使用滾球軸承的目的在于減少磨擦。
- The friction factor has a little effect on bucking critical load. 摩擦系數的改變對臨界失穩載荷的影響不大。
- The object of using ball bearings is to reduce the friction. 使用滾球軸承的目的在于減少磨擦。
- The friction of cotton increases with increasing regair. 棉纖維的摩擦力隨回潮率的增加而增加。
- The arithmetics of contact element, including three aspects of interface condition, Coulomb friction type and the weak formulation of interface condition are investigated in detail. 在接觸單元的力學機理方面,從接觸界面條件、Coulomb摩擦類型和接觸界面條件的弱形式等三個方面對接觸單元的算法進行了詳細的研究。
- The friction of cotton increases with increasing regain. 棉纖維的摩擦力隨回潮率的增加而增加。
- The air flow is slowed down by the friction with adjacent objects. 空氣流動的速度會(huì )因周?chē)锛Σ炼鴾p慢。
- The object of using ball - bearings is to reduce the friction . 使用滾球軸承的目的在于減少磨擦。
- Reduce the friction and eliminate the need of lubricant. 減少使用步靴及針送車等防皺車種和拖拉輔助裝置的需要。
- When Joan returned to work, the friction between them increased. 瓊回來工作后, 他們之間的摩擦加劇了。
- In a printer, the removable type element. 印刷機上可拆卸的打印部件。
- The friction is modeled with a modified coulomb friction model. 模具與板料的接觸摩擦采用一個修正的庫侖摩擦模型。
- The friction simulation model of the stabilized turntable is built. 建立了穩定轉臺摩擦的仿真模型。
