您要查找的是不是：
- International Journal of Engineering Fluid Mechanics. 國際工程流體力學雜志。
- Look, I were really not a good student of fluid mechanics. 看來我實在不是一個流體力學的好學生。
- New collection of exercise problems in engineering fluid mechanics II. 工程流體力學新型習題集2。
- Robert L. Mott，2000，“Applied Fluid Mechanics，5th ed”，prentice-Hall，Inc. 流體力學，張世鄉，陳維方，龔杰，鐘明吉譯，全華科技圖書股份有限公司，臺北.
- The modern fluid mechanics and thermodynamics are linked so closely as to be virtually the same subject . 現代流體力學與熱力學的聯系如此密切，幾乎成為一門學科。
- Emphasizing the role of exercise and homework in the teaching of fluid mechanics. 在流體力學教學中加強習題課與作業環節的體會(huì )。
- The function of siphon unit based on fluid mechanics siphon principle is to control turnon and turnoff of pump outflow. 虹吸管出水斷流裝置是基于流體力學虹吸原理、控制水泵出水通與斷的裝置。
- Garret C J R.Wave forces on a circular dock(Part 1)[J].Journal of Fluid Mechanics,1971,46:129-139. 尤云祥;繆國平;程建生;朱仁傳.;兩層流體中水波在剛性垂直薄板上的反射與透射[J]
- F. P. Bretherton, "The Motion of Long Bubbles in Tubes", J. Fluid Mechanics, 10, 166-188(1961). 張修銘,"轉注射出成型過程中氣泡成型機制之可視化探討",國立中央大學機械工程研究所碩士論文(1997
- The coupled model smoothly inpaints the target region by using inviscid Helmholtz vorticity equation in fluid mechanics. 耦合模型使用流體力學中無粘度亥姆霍茲渦量方程平滑的修復圖像缺失信息區域。
- In order to achieve better simulation of dynamic clouds, this paper proposes a way to integrate FBM and Fluid Mechanics based Navier-Stokes Equation. 最后，本文提出了一種將FBM算法和基于流體的方法相結合的方法，通過求解Navier-Stokes方程得到基于物理模型的云的動態效果。
- The low temperature gas-liquid separator combines aerodynamics, thermodynamics and fluid mechanics theories to make a compact gas conditioning process. 低溫氣液分離器是一種結合了氣體動力學、熱力學和流體力學理論為一體的新型氣體干燥處理裝置。
- J.C.Tannehill, D.A.Anderson, R.H.Pletcher (1997) Computational Fluid Mechanics and Heat Transfer, 2nd ed., Talor &Francis, Philadelphia, PA, Chapter 3. 王耀塵楊天祥陳國聲顏嘉良;多區段晶圓背壓對于化學機械研磨制程中材料移除率空間均勻度的影響;第十四屆全國計算流體力學學術研討會(huì ).
- Coekerill.Themodynmics and fluid mechanics of Ranque-Hilsch vortex tube.Masters Dissertation,University of Cambridge,1998. 巫江虹;張祉佑.;渦流管分離模型及實驗研究
- Anderson, D. A., Tannehill, J. C., Pletcher, R. H., 1997, Computional Fluid Mechanics and Heat Transfer, 2nd ed., Taylor &Francis, London. 王振源及吳志陽;2001;“快速熱處理機臺即時溫度量測系統最佳化設計;”機械關鍵系統技術研究發展第二期三年計劃;中山科學研究院.
- Abstract: The strong viscous effect induces the fluid mechanics in micro nozzles sufficiently deviated from those in macroscale. 摘要： 在微縮放噴嘴中，強粘性影響導致了流動結構完全偏離了宏觀尺度。
- The formula for moving mould casting passage assemble gap in the case of no steel leaking has been deduced by the viscosity fluid mechanics method. 本文應用粘性流體力學的方法推導了在鋼不鉆漏情況下移動式結晶器澆鑄通道配合間隙公式。
- On the basis of fluid mechanics, a comprehensive model for simulating flow field at nozzle exit is developed by using desecrate vortex method. 根據流體力學原理，用離散渦方法建立了在復平面上模擬噴嘴出口流場的一套完整模型。
- According to the fluid mechanics, Euler's method, and the concepts of traffic flow system and control field are proposed. 參照流體力學，提出研究交通流的歐拉方法、交通流系統和控制域的概念。
- In accordance with the theory of heat transfer and fluid mechanics, the paper presents the stator 3D temperature field model of turbogen- erators. 根據傳熱學和流體力學的基本原理，提出了汽輪發電機定子三維溫度場的數學模型，模型中考慮了溫度場與流體場的耦合。
