您要查找的是不是：
- In this paper the properties of the polymer modified cement mortar are studied of DIDY formwork concrete surface coated layer for protection. 本文主要對模網混凝土聚合物改性水泥砂漿保護層的性能進行研究，著重探討了與耐久性密切相關的抗裂性能和抗滲性能。
- Drying of surface coating on picture tube. 顯象管表面涂層的干燥；
- Surface layer numbers, each coating thickness, surface coating and substrate Composition test respectively etc. 表面處理層層數、厚度、成分檢驗、基材材質檢驗等。
- The scratch does not penetrate the coating layer to Die. 刮傷沒有穿透保護層。
- A substance, such as grease or oil, that reduces friction when applied as a surface coating to moving parts. 潤滑劑一種象油脂或汽油的物質，被擦在運動部分表面時可減少摩擦
- Quick-drying Modified coating prepared with PS foamed plastics waste can be used as waterrproof and anticorrosion coating layer on the surface of steel and building materials. 以廢舊聚苯乙烯（PS）泡沫塑料制備的快干改性涂料能應用于鋼材、建材表面作防水防腐涂層。
- Residue coating: Very fine layer of surface coating lift by incomplete processing in the non-image area of an offset plate, and which will cause scum when the plate is printed. 殘留涂劑:柯式印版，因沖版過程處理不善，非印紋地方留下薄薄的涂層的情況。在印刷時，它會(huì )造成浮污。
- Compared with that of furane resin bonded sand,the feasibility of phenol resin bonded sand in forming a uniform coating layer in the inside mould surface is studied as well. 本文分析研究了砂在鑄型中的成型條件及光潔內表面的形成機理，并對比研究了覆膜和呋喃自硬砂在鑄型內表面形成均勻覆砂層的可行性。
- Residue coating Very fine layer of surface coating lift by incomplete processing in the non-image area of an offset plate, and which will cause scum when the plate is printed. 殘留涂劑柯式印版,因沖版過程處理不善,非印紋地方留下薄薄的涂層的情況。在印刷時,它會(huì )造成浮污。
- The homogeneity of the coating layer was characterized by SEM and EDX. 用SEM（掃描電鏡）和EDX（能譜）分析鍍層的均勻性。
- In ambient temperature, the enrichment is caused mainly by the diffusion of substrate elements passing through the defect and grain bo-undary of the coating layer and then spreading over the surface by surface diff-usion. 常溫下這種富集主要是基底元素通過缺陷和晶界擴散穿透鍍層再行表面擴散而遍及表面的。
- A glossy,resinous material,such as the exudation of the lacquer tree,used as a surface coating. 天然漆一種用作表面涂層的光滑的樹脂般的物質，如漆樹的分泌物
- According to the results of FT-IR and HRTEM,it was inferred that the LM-N308 was bound with about 6.1% on the surface of nano-attapulgite particles,and an organic coating layer also formed. 紅外光譜和高分辨透射電鏡照片表明;約有占改性產品質量6.;1%25的LM-N308以化學鍵的形式結合在在納米凹凸棒石的表面;形成有機包覆層。
- Non-destructive thickness measurement of coating layers. 涂層的無損測厚。
- A glossy, resinous material, such as the exudation of the lacquer tree, used as a surface coating. 天然漆一種用作表面涂層的光滑的樹脂般的物質，如漆樹的分泌物
- The coated layer on the surface of PTW were characterized and analyzed with SEM, FTIR, XRD, and EDX. 利用SEM、FTIR、XRD、EDX等手段對鈦酸鉀晶須表面包覆層進行了表征和定量分析,并利用Zeta電位儀測試了包覆前后鈦酸鉀晶須的表面電荷情況。
- They can be used as edible films or surface coatings on the polyolefin films. 殼聚糖涂層復合薄膜用于活性包裝具有巨大的潛力。
- Wall cloth and enclothe there should be striking horizontal pattern on the coating layer of metope. 墻布和覆蓋在墻面的涂料層上要有醒目的水平圖案。
- A defect in the magnetizable surface coating ( for example, on magnetic disc ) consisting of a raised or thick area. 在磁性表層上(如磁盤上)的缺陷,包括隆起的區域或厚的區域。
- The result of coating and platemaking shows that the coating layer is secure, the image is sharp. 用這種再生版基所作的涂布和曬版結果表明,涂料附著牢固,圖象清晰。
