您要查找的是不是：
- The crankcase is the lower part of the engine cylinder block. 曲軸箱是發動機氣缸體較低的部分。
- Position the cylinder heads onto head gaskets and cylinder block. 將汽缸蓋安置到汽缸蓋罩墊和汽缸體上。
- Tighten the radiator draincock and (if removed), the cylinder block drain-plug. 旋緊散熱器排放口和汽缸體排放塞（如果它被卸去了）。
- Water-filled container surrounding a machine to cool it,especially that surrounding the cylinder block of an engine. 圍在機器周?chē)睦鋮s機器的裝滿水的容器，尤其用于機車的氣缸柱的周?chē)?/li>
- Remove the crankshaft from the cylinder block (refer to Cylinder Block Disassemble). 從汽缸體上卸去曲軸（參看“汽缸體－拆卸”）。
- The oil passages in the cylinder Block should be cleaned out as part of the engine Block Service and Maintenance job. 在檢修發動機時,應對缸體中的油道進行清潔保養。
- The principles to construct finite element model for modal analysis of the cylinder block have been obtained. 通過研究，得出了建立內燃機機體的有限元模型的一些原則。
- The main bearing journals fit into the cylinder block and the big end journals align with the connecting rods. 主要軸承曲頸安裝在氣缸體和與連桿大頭末端匹配的曲頸上。
- Cylinder head, Cylinder Block, Crankshaft, Liner, piston, piston ring connecting rod, valves, turbochargers etc. 缸蓋、缸體、曲軸、缸套、活塞、連桿、氣門、活塞環、活塞銷、增壓器等；
- As the frame work of internal combustion engine, the cylinder block is the mainnoise radiation surface. 機體作為內燃機的骨架,是內燃機噪聲的主要輻射表面。
- The joint between the cylinder Block and the head must be tight and able to withstand the pressure and heat developed in the combustion chambers. 氣缸體與氣缸蓋之間的接合處必須保持密封,并且能夠承受燃燒室產生的高壓和高溫。
- The oil pan and the lower part of the cylinder block together are called the crankcase; they enclose, or encase, the crankshaft. 油底殼和氣缸體的下半部分一同被叫做曲軸箱；他們把曲軸封閉起來。
- Modified cylinder liners of BJ212 Jeep engine have been attempted to be inserted into a seriously worn TOYOTA Jeep model 3F engine cylinder block. 豐田吉普車3F發動機缸體嚴重磨損后。
- The oil pan and the lower part of the cylinder block together are called the crankcase;they enclose, or encase, the crankshaft. 油盤和氣缸體的下部一起被稱為曲軸箱，用來封閉或罩住曲軸。
- An integral part of it as follows: adjustment bolt, the Executive Body Box,, cylinder block, cylinder axis, piston, connecting rod, cardan shaft. 它的組成部分為：調節螺栓、執行機構箱體、曲臂、氣缸體、氣缸軸、活塞、連桿、萬向軸。
- As an instance, compared with using aluminum alloy cylinder block, using vermicular iron block can increase the ratio of power/engine weight. 與采用鋁合金缸體相比，采用蠕鐵缸體可使發動機的單位質量功率提高。
- Stress can be the undoing of so many fine players. 緊張可能是這許多優秀選手失敗的原因。
- The cylinder block is an open-deck, midi-skirt type with cast-in iron liners and a die-cast aluminium lower crankcase and a stamped oil pan. 機體是一個開放的甲板，比利裙型鑄造鐵班輪和壓鑄鋁曲軸箱和降低沖壓油底殼。
- As an instance, compared with using aluminum alloy cylinder block, using vermicular iron block can increase the ratio of power / engine weight. 與采用鋁合金缸體相比,采用蠕鐵缸體可使發動機的單位質量功率提高。
- This paper The cause of the scab of the inside surface of cylinder block on condition that the resin sand cores are made in cold core box. 本文分析了冷芯盒村脂砂芯條件下缸體鑄件內腔結疤的原因。
