您要查找的是不是：
- This metal defect is known as stress corrosion cracking. 其金屬缺陷就稱為應力銹蝕腐蝕裂紋。
- Intergranular stress corrosion cracking behavior of austenitic steels on hydrogenated high-temperature. 奧氏體鋼在高溫氫化物中的晶間應力腐蝕開裂性能。
- The analysis results indicated that the H_2S in the LPG caused sulfide stress corrosion cracking (SSCC) of the flange. 分析結果表明,法蘭斷裂是由液化氣中的H2S所引起的應力腐蝕開裂。
- The analysis results indicated that the H2S in the LPG caused sulfide stress corrosion cracking (SSCC) of the flange. 分析結果表明，法蘭斷裂是由液化氣中的H2S所引起的應力腐蝕并裂。
- The results show that the cracking of the pipe is a kind of stress corrosion cracking (SCC). 分析結果表明，高壓油管的開裂是應力腐蝕開裂造成的。
- Stress corrosion cracking occurs in both aluminum and magnesium alloys as well as steel. 鋁和鎂合金以及鋼都會(huì )發生應力銹蝕腐蝕的破裂。
- Relationship between yield strength and near-neutral pH stress corrosion cracking resistance of pipeline steels-an effect of microstructure. 管道鋼的屈服強度和抗近中性pH應力腐蝕開裂間的關系-顯微結構的影響。
- Commonly used as stem material in pressure-rated valves, silicon bronze has greater resistance to stress corrosion cracking than common brasses. 通常用作額定壓力閥門的閥桿材料的硅青銅比普通黃銅具有更好的抗應力腐蝕裂紋的性能。
- The reason and the main influence factors to the stress corrosion cracking of the sphere were analysed, preventing countermessure had been proposed. 對球罐應力腐蝕開裂的原因和主要影響因素進行了分析，并提出了防止對策。
- The stress corrosion cracking threshould stress intensity K_(1scc) of aluminum alloy LD10CS is measured by DCB specimen in the present paper. 本文用DCB試樣測量鋁合金LD10CS的應力腐蝕界限應力強度因子K_(1SCC)。
- The presence of the greater resid-ual tensile stress induces the stress corrosion cracking in the course of the acid pickling. 其原因是磁屏表面存在較大的切向拉應力，從而在酸洗過程中產生了應力腐蝕開裂。
- By the testing, it will be found that tempering makes the K_(1scc)(stress corrosion cracking threshold level for plane strain condition) changed. 由試驗結果可知回火會(huì )使K_((?) scc)(平面應變條件下的應力腐蝕開裂門檻值)改變.
- Stress corrosion cracking and fatigue corrosion cracking are easily seen in ship propeller made of copper alloy for working in seawater. 采用錳黃銅或鋁青銅鑄造的大型海船螺旋槳在海水中工作時容易產生應力腐蝕裂紋和腐蝕疲勞裂紋。
- Commonly used as stem materials in pressure-rated ales, silicon bronze has greater resistance to stress corrosion cracking than common brasses. 通常在壓力等級閥門中作為閥桿材料使用。在防止金屬超壓力引起的腐蝕造成的斷裂方面,硅青銅比常見的黃銅具有更好的性能。
- The intergranular stress corrosion cracking(SCC) problem in steel shells on hightemperature blast furnace stoves was investigated in this paper. 以高風溫熱風爐的沿晶應力腐蝕斷裂問題為背景，研究了低合金鋼在硝酸鹽溶液體系中的應力腐蝕行為。
- Commonly used as stem materials in pressure-rated valves, silicon bronze has greater resistance to stress corrosion cracking than common brasses. 通常在壓力等級閥門中作為閥桿材料使用。在防止金屬超壓力引起的腐蝕造成的斷裂方面,硅青銅比常見的黃銅具有更好的性能。
- Stress Corrosion Cracking of polythionic acids(PSCC) of 304 SS were investigated by SSRT,SEM and metallographic analysis. 通過對隔板的檢查和分析,判斷隔板斷裂屬于連多硫酸引起的應力腐蝕開裂。
- The examination and analysis reveal that the cracking of the plates is the result of stress corrosion cracking (SCC) caused by polythionic acid. 通過對隔板的檢查和分析,判斷隔板斷裂屬于連多硫酸引起的應力腐蝕開裂。
- The stress corrosion cracking (SCC) behaviour of 7075 aluminum alloy was studied using slow strain rate test (SSRT) technique. 采用慢應變速率試驗(SSRT)研究了7075鋁合金的應力腐蝕行為。
- This alloy retards stress corrosion cracking and has improved resistance to sulfuric acid. alloy 20 finds wide use in all phases of chemical processing. 這種合金能夠緩解金屬超應力引起的腐蝕所造成的斷裂,其抗硫酸腐蝕的性能也有很大的改善。合金20在化工生產過程中具有廣泛的應用。
