您要查找的是不是：
- Replace the cylinder outlet seal and valve cap. 替換鋼瓶排氣口密封和閥門帽。
- This valve is not to be used as a steam valve. 這個閥門不能用作蒸汽閥門。
- Repeat steps2-5 until proper sag is achieved, then replace the air valve cap. 重復2－步驟以達到最佳預壓行程后，蓋上氣閥嘴帽。
- Repeat steps 2-5 until proper sag is achieved, then replace the air valve cap. 重復2－5步驟以達到最佳預壓行程后，蓋上氣閥嘴帽。
- Locate the Schrader air valve on the shock and remove the air valve cap. 找到避震上的美嘴氣閥，取下氣閥帽。
- These are not to be used as steam valves. 這些閥門不能用作蒸汽閥門。
- Presents the development and use of new stainless steel heap welding technique for main steam valve sealing surface. 介紹了主蒸汽閥門密封面不銹鋼堆焊新工藝的開發與利用。
- Unscrew the Allen screw in the middle of valve cap and lift up the cap just enough to pick up the old diaphragm. 旋松閥帽中間的內六角螺絲，并且提起閥帽，正好足夠拿走舊閥膜。
- For surfacing welding roller and over-heat steam valves. 軸及過熱蒸汽閥門的堆焊，堆焊金屬具有空淬特性。
- All parts inside adopt the stainless steel, and are installed on the valve cap, maintenance is convenient. 內部零件全部采用不銹鋼制造，并且安裝在閥蓋上，維修保養極為方便。
- Servo unit can adjust the opening size of each steam valve with responding to the electro-instruction sent from DEH. 執行機構響應從DEH送來的電指令信號，以調節汽輪機各蒸汽閥開度。
- Do not overheat cylinders to increase pressure or discharge rate. NEVER insert an object (e.g., wrench, screwdriver, pry bar, etc.) into valve cap openings. 禁止使鋼瓶過熱來增加壓力或流速。禁止把物體（如扳手、螺絲起子、撬桿等）插入閥門帽地開口處。
- NEVER insert an object (e.g., wrench, screwdriver, pry bar, etc.) into valve cap openings. Doing so may damage the valve causing it to leak. 禁止把物體（如扳手、螺絲起子、撬桿等）插入閥門帽的開口處。這樣做可能損傷閥門，導致泄漏。
- A neural networks backstepping control technique is presented for turbo generator speed governor to realize turbine steam valve control. 針對汽輪發電機調速系統,提出了一種新的神經網絡(luò )逆推控制方法,實現了汽門開度控制。
- NEVER insert an object (e. G., Wrench, screwdriver, pry bar, etc.) Into valve cap openings. Doing so may damage the valve causing it to leak. 禁止把物體(如扳手、螺絲起子、撬桿等)插入閥門帽的開口處。這樣做可能損傷閥門,導致泄漏。
- NEVER insert an object (e.g., wrench, screwdriver, pry bar, etc.) into valve cap openings. Doing so may damage the valve causing it to leak . 禁止把物體（如扳手、螺絲起子、撬桿等）插入閥門帽的開口處。這樣做可能損傷閥門，導致泄漏。
- This pack is aimed at the convenience market. It contains a steam valve to allow the pack to be cooked in the microwave without the need for piercing the pack. 這種包裝針對的是便利市場。包裝包含一個放氣閥門,可以無需刺穿包裝在微波爐內加熱。
- All seal steam irons, high seals steam valve, the base is big, high efficiency, generally uses in ironing the woolen sweater and the quite thick clothes. 特點：采用人性化設計木制手柄，隔熱性好，高密封全不銹鋼底板，底板大，高效率使用。
- Li Wenlei, Jing Yuanwei, Liu Xiaoping.Adaptive robust backstepping design for nonlinear steam valve controler[J].Proceedings of the CSEE ,2003,23(1): 155-158. [8]李文磊;井元偉;劉曉平.;非線性汽門控制器的自適應魯棒逆推設計[J]
- What is fiercest is when the high pressure sautes boils the rice gruel or the mung bean soup because of the steam valve malfunction causes the serious face steam to scald. 最厲害的是在高壓鍋燒煮米粥或綠豆湯時因汽閥失靈而造成嚴重的面部蒸汽燙傷。
