您要查找的是不是：
- The system pressure had very big fluctuation during rolling process. 在軋鋼過程中系統壓力出現大幅度波動。
- Yes,when steel product must be accurated in size and must have a smooth surface,the cold rolling process must be used. 能。如果鋼材的尺寸精度要求很高，表面必須光潔，那么就需要進行冷軋。
- Rolling process adopts the advanced untwisted rolling device, keep wiring from twist and tension. 成卷工序采用先進的無扭曲成卷機,保證在布線中無扭曲和拉伸。
- The electronic workpiece acceleration ensures the quality of the decisive start of the rolling process. 電子控制的工件驅動裝置確保了最開鍵的滾軋起始階段的質量。
- Tungsten carbide can withstand the abrasive action of hot metal during the rolling process far better than cast iron. 碳化鎢耐受軋制過程中熱金屬軋件磨蝕作用的能力比鑄鐵大得多.
- Yes. when steel product must be accurated in size and must have a smooth surface, the cold rolling process be used. 能。如果鋼材的尺寸精度要求很高，表面必須光潔，那么就需要進行冷軋。
- A brick element re-meshing technique was presented for shape-metal rolling process. 摘要提出了一種適用于型鋼軋制及其類似過程的六面體網格重構方法。
- In order to meliorate efficiency, it is decided to adopt rolling process in construction. 但碾壓貧混凝土基層在國內應用較少，現行規范找不到依據。
- The results show that the grain of the strip was refined in the cold rolling process due to the DRX and DRV. 結果表明：在冷軋過程中，因動態再結晶和動態回復，使薄帶的晶粒進一步得到細化。
- The influences of rolling process and impurity atoms on the texture developments were also analysed. 同時也分析了鋼板變形過程及雜質原子對織構形成的影響。
- One of the method of curbing plate bending in jobbing sheet rolling process was researched. 研究了在中板軋制過程中抑制板坯彎曲的措施之一。
- During the cool rolling process of SUS301 stainless steel,the punctual flaws and cracks are offen observed. SUS301不銹鋼在冷軋過程中表面經常出現點狀缺陷及裂紋。
- The deformative charateristics of cementite of white cast iron during the rolling process was investigated. 研究了慘碳體在白口鑄鐵軋制變形過程中的變化特點。
- Synopsis There are some factors that cause the formation of hot strip side-camber in the rolling process. 板帶軋制過程中因受某些因素影響會(huì )形成側彎。
- Test results of lead work-pieces verify the feasibility of rolling process and die design. 鉛試件輾壓試驗結果證明輾壓成形工藝和模具設計的可行性；
- The pores of the sintered layer are filled with a mixture of PTFE (polytetrafluoroethylene) and other friction-reducing additives by a rolling process. 通過壓制工藝,將PTFE(聚四氟乙烯)與其他能降低摩擦的添加劑組成的混合物填入燒結層上的細孔。
- We include the storage of the part program data in the CNC for the shortest change-over time and repeatable rolling process. 我們提供的共參數儲存在CNC系統里，保證了進行重復定單加工時的最短更換時間。
- Rolling process in high-speed wire line can be conducted successfully without skew and twist if the line can be regulated automatically. 在高速線材軋制過程中,軋件易發出偏斜和扭轉,如果能夠實現自動找正,則可保證順利軋制。
- Rolling lines are designed by rolling, moving TOX rivet of single cantilever and automatic cutting, which may be referred to similar rolling process. 設計由滾壓、單體懸臂移動式TOX鉚接和自動斷料等工藝流程組成的滾壓成形線可作為類似滾壓工藝參考。
- The rolling process and the design of pass of rolling mill were researched, meanwhile, the rolling pressure of Y-type rolling mill was also calculated. 本文從研究軋制原理入手,對軋制工藝及孔型設計進行了深入研究,給出了Y型軋機軋制壓力計算。
