您要查找的是不是：
- solvent sensitive adhesive 溶敏性膠粘劑
- The process for solvent rubber presure sensitive adhesive and emulsion presure sensitive adhesive transfered to foam patch was also investigated. 研究了橡膠溶劑型和丙烯酸酯乳液型壓敏膠對橡膠泡沫切片的濕法轉移施膠工藝;
- Mesh must have pressure sensitive adhesive backing added to one side. 網格一側背部需有壓敏粘性貼。
- SILGRIP? PSA950 pressure sensitive adhesive is a toluene solution of phenyl based polysiloxane gum and resin. PSA950 是苯基基礎之聚矽氧烷樹膠和樹脂的甲苯溶劑感壓膠。
- Please note: You must be able to provide the pressure sensitive adhesive backing in addition to the fiberglass mesh. 備注:貴方提供的玻璃纖維網格背部必須有壓敏粘性貼。
- Non-woven tissue double coated with an aggressive, good tack, hotmelt pressure sensitive adhesive. 本版權所有中華經貿網，任何人未經同意不得擅自引用！
- The effects of tackifing resin, surface active agent on properties of pressure sensitive adhesive wre studied. 并研究了增粘樹脂、表面活性劑對壓敏膠性能的影響。
- In this paper, acrylic multi-copolymerization emulsion pressure sensitive adhesive (PSA) was prepared by using reactive emulsifier and their influence factors were studied. 采用反應性乳化劑制備丙烯酸酯類多元共聚乳液,探索各因素對乳液及壓敏膠性能影響。
- Coating and laminating of: multi-layer films (extrusion coating); synthetic leathers; pressure sensitive adhesive tapes; barrier layers; abrasives. 我們的產品代表了平膜生產流程連續在線厚度或重量測量的最常見方法。
- It is a new method preparing pressure -- sensitive adhesive, with good repeated stickness, with acrylate as main monomer, by suspension polymerization. 利用懸浮聚合工藝制備壓敏膠是一種新穎的方法。
- As an expert in surface coating and pressure sensitive adhesive film technology,Brady is dedicated to provideing integrated solutions for customers. 作為全球表面涂層和壓敏膠膜技術的專家、貝迪致力于向客戶提供集成解決方案。
- It is widely used in alcohol-soluble and water-soluble poly membrane adhesive, pressure sensitive adhesive, plastic printing ink, and electronic flux, etc. 、可廣泛用于醇溶性及水溶性復膜膠、敏膠、料印刷油墨、子助焊劑等。
- Methods Drug-in adhesive patches of amlodipine besylate were prepared by dissolving amlodipine besylate and different enhancers into the homemade pressure sensitive adhesive. 方法將苯磺酸氨氯地平及各種滲透促進劑直接溶于自制壓敏膠中制備壓敏膠分散型貼劑；
- A new type of acrylic emulsion pressure - sensitive adhesive was prepared by using hydroxypropyl aery-late and N - methylol acrylamide as cross - liking monomers. 選用丙烯酸羥丙酯和N-羥甲基丙烯酰胺作為交聯單體參與丙烯酸酯共聚,研制出一種新型的丙烯酸乳液壓敏膠。
- Using styrene-isoprene block copolymer(SIS)as the base material and some auxiliary additives,the SIS-based hot melt pressure sensitive adhesive(HMPSA)was prepared. 以SIS為主體原料,配合增粘樹脂、增塑劑、防老劑等研制出SIS熱熔壓敏膠。
- UV curing polyacrylate pressure sensitive adhesive was synthesized by core-shell polymerization, at the same time,chain transfer agent NDM was added for controlled reaction rate. 在常溫下涂布后直接紫外光交聯固化,考察了光引發劑、交聯劑、光固化時間等因素對UV固化壓敏膠綜合性能的影響。
- The influences of photoinitiator, crosslinking agent and cure time on the properties of UV curing pressure sensitive adhesive were discussed in the paper. 在常溫下涂布后直接紫外光交聯固化,考察了光引發劑、交聯劑、光固化時間等因素對UV固化壓敏膠綜合性能的影響。
- Development of solvent type pressure sensitive adhesive of acrylic acid series 溶劑型丙烯酸系壓敏膠的研制
- This paper introduces the technique of pressure sensitive adhesive tape in use for medicine made by ourselves,analysis the technical difficulties,and then gives the choices and control methods of some targets in the process technique. 介紹了自行研制的壓敏型醫用膠粘帶的生產工藝，分析了工藝流程與技術難點，給出了生產工藝中一些指標的選擇與控制方法，應用此技術研制的新藥貼膏已獲國家專利.
- Made up of pressed sensitive adhesive tape、particular paper and absorbant cotton. Used for fixation of transfusion canal、acus handle during transfusion and protection of puncture part. 本品由壓敏膠帶、離型紙、吸收棉組成，用于輸液過程輸液導管、針柄的固定和輸液穿刺部位的保護。
