您要查找的是不是：
- Y?axial-beam fixing geotechnical centrifuge overweighted robot is analysed with finite element method in this paper and meshed with 3D 10 - node tetrahedral structural solid into 20888 elements and 43220 nodes finite element model. 對土工離心機超重機器人的重要部件-Y軸橫梁進行了有限元分析。 采用三維十節點四面體結構實體單元進行網格的劃分,得到20888個單元和43220節點的有限元模型。
- Partial Eight Node Finite Element with Equivalent Crosswise Displacement 偏八結點等橫向位移有限元
- We take the results of the deformation to control facial expressions.There are six degrees of freedom on each node of the finite element composed of DKT and CST. 論文中采用DKT與CST有限元素的組合來做為網格結構分析的基礎，使每個節點有六個自由度，并以此來處理變形問題。
- Higher-Order Finite Element for Sandwich Plates. 夾層平板高階有限元。
- Finite element analysis for complex structure. 復雜結構有限元分析。
- The Finite Element Methods Vol.1 5th ed. 有限元法第1卷第5版。
- Its finite element model is established. 構造了其有限元模型。
- ADINA finite element method are adopted. 采用ADINA 有限元分析軟件進行分析。
- Using the finite element analysis software MSC. 摘要采用有限元分析軟件MSC.
- Renumbering node number of finite element makes the bandwidth reduced,the consumption of RAM decreased and computing speed increased. 改善有限元的結點編號可以減少帶寬,從而減少內存的消耗,減少計算時間,提高計算速度。
- A finite element method was proposed to plot the formation drillability plane and a four node rectangular was used as an example to illustrate the computation procedure. 針對該問題,提出了一種基于有限單元法理論繪制區域可鉆性剖面的計算方法,并以平面四節點矩形單元為例,給出了具體的計算過程。
- Physical insight is valuable in using the finite element method. 在利用有限方法時，物理上的觀點是有價值的。
- Finite element study of protein structure under high pressure. 高壓下蛋白質結構的有限元研究。
- The finite element method theory and applications II. 有限單元法原理與應用2。
- New Method for Finite Element Preprocess of Large Hydrogenerator. 一種適于大型水輪發電機磁場計算前處理的新方法。
- A static finite element model of an air spring was given. 摘要文中建立了空氣彈簧的靜態有限元模型。
- The test processes are recurred using LS-DYNA finite element code. 利用LS-DYNA有限元程序數值再現試驗過程。
- This method agrees well with the finite element method. 本文方法和有限元方法基本吻合。
- The finite element modal analysis of fan axis is discussed. 對某鼓風機軸有限元模型進行了模態分析。
- The stress and deformation of crankshaft are calculated by finite element method with six load boundary conditions and three displacement boundary conditions. 分別采用六種載荷邊界條件和三種位移邊界條件對曲軸應力和變形進行了有限元分析；
