您要查找的是不是：
- To release the shift key on a typewriter or computer keyboard. 松開一臺打字機或計算機的鍵盤上的字形變換鍵
- Straightening of the shaft after heat treatment is a key process. 在軸桿類零件生產過程中,熱處理后校直是一道關鍵工序。
- Immediately after you hear the startup tone, press and hold the Shift key. 聽到啟動聲音后,立即按住Shift鍵。
- The ash melting process is a key process for dioxins zero emission. 其中，灰渣的熔融處理是限制二惡英零排放的重要步驟。
- Silk degumming is a key process for silk dyeing and finishing. 真絲綢脫膠是真絲綢染整加工的一道重要工序。
- There are two shift keys on the computer keyboard. 在計算機鍵盤上有兩個上檔鍵。
- Differential Binary Phase Shift Keying. 差分二進制相移鍵控。
- Decatizing groove is a key processing component of the polypropylene device. 汽蒸槽是聚丙烯裝置擴能改造的關鍵工藝設備。
- During alumna preduction, mother liquor evaporation is the key process. 在氧化鋁生產過程中，母液蒸發是關鍵的工藝過程。
- Backfill grouting is a key process during shield tunnel construction. 摘要壁后注漿是盾構施工的關鍵工序。
- Gets a value that indicates the state of the SHIFT key when the associated event occurred. 獲取一個值,該值指示關聯事件發生時Shift鍵的狀態。
- To create a thicker line, hold the SHIFT key down and press the hyphen key three or more times, and then press ENTER. 要創(chuàng )建較粗的線條,請按住Shift鍵同時按三次或更多次連字符鍵,然后按Enter。
- To move it in ten-frame increments, hold down the Shift key while pressing the arrow key. 要以十幀的增量移動,請在按住Shift鍵的同時按下箭頭鍵。
- Process volution: Key process areas are not processes. 過程進化：關鍵過程域并不是過程。
- Press the SHIFT key and hold it while you drag the mouse pointer over the additional elements that you want to select. 按住Shift鍵在要選擇的其他元素上拖動鼠標指針。
- To select contiguous items, click the first item, hold down the SHIFT key, and then click the last item. 若要選擇多個連續的項,單擊第一項,按住Shift,然后單擊最后一項。
- To select multiple adjacent items, click the first item, hold down the SHIFT key, and then click the last item. 若要選擇多個相鄰項目,請單擊第一個項目,按住Shift鍵,然后單擊最后一個項目。
- To select multiple adjacent items, press and hold the SHIFT key while selecting. 若要選擇多個相鄰項目,請在選擇時按住Shift鍵。
- Structure designing and key processing technologies for wafer level package(WLP) were studied. 對圓片級封裝(WLP)的結構設計和關鍵工藝技術進行了研究;
- To select multiple controls, hold down the SHIFT key and then click the controls you want to remove. 要選擇多個控件,請按住Shift鍵,然后單擊要刪除的控件。
