您要查找的是不是：
- Critical resolved shear stress (O’crss). 臨界分剪切應力。
- There is a diminishing difference in the shearing stress with rising pressure. 隨著壓力的升高，切應力的差值減
- The crushing process is carried out by pressure and shearing stress. 在相應的壓力和切力作用下,物料得以破碎。
- The interfacial shear stress is a constant proportion of the bottom shear. 交界面的剪力與底部剪力之比是常數。
- An apparent or pseudo change in the sign occurs when a stress trajectory passes through an isotropic point. 當一個主應力跡線通過一個各向同性點時，該符號會(huì )發生一個表面上的或虛假的改變。
- The process does not affect the shear stresses. 這樣的處理并不影響剪應力。
- We may draw curves which have everywhere one of these directions for a tangent, these curves are called stress trajectory. 我們可以畫一簇曲線，這簇曲線處處都有一個主方向作為切線，這些曲線叫做應力軌線。
- According to the twin shear stress theory, this paper improves on Duncan Model. 根據雙剪應力理論對鄧肯模型進行了修正。
- We may draw curves which have everywhere one of these directions for a tangent , these curves are called stress trajectory. 我們可以畫一簇曲線，這簇曲線處處都有一個主方向作為切線，這些曲線叫做應力軌線。
- Tensile stress and shear stress are transferred by PBL shear connectors. 計算得到鈉-混凝土接頭的最不利荷載組合內力。
- A fluid is a substance that deforms continuously under an applied shear stress. 液體在剪應力作用下不斷變形？？
- The main shear stress and its hydraulic system, calculation and research. 主要對其剪切力和液壓系統進行計算和研究。
- Thus fluid shear stress has been considered one of the atherogenic factors. 在動物研究中還發現切應力與內皮細胞增生程度有關。
- With gob span increasing, equivalent shear stress in basic roof increases. 隨著采空區跨度的不斷增加，基本頂等效剪力不斷增大。
- Draw the element for maximum shear stress and mark values of all stresses. 畫出最大剪應力的單元體并標出全部應力值。
- Friction and cohesion are best defined in terms of the plot of shear stress versus normal stress given in Figure 9. 摩擦角和粘結力最好是根據圖9中剪切應力和法向應力的關系曲線確定。
- The maximum shearing stress to which the material is subjected has a value equal to the radius of the circle. 材料承受的最大應力數值等于圓的半徑。
- The feed material is broken between the counter-rotating rolls and crushed by pressure and shearing stress. 在壓力和切力的作用下,給料在彼此相向旋轉的軋輥間破碎。
- Theoretical expression ot the wall shearing stress has been deduced for the level rotary flow in an internal energy dissipation tunnel. 摘要本文推導了水平旋轉內消能泄洪洞空腔環流壁面切應力的理論分析表達式。
- Cohesion is best defined in terms of the plot of shear stress versus normal stress given in Figure 9. 粘結力最好根據圖9中剪切應力和法向應力的關系曲線確定。
