您要查找的是不是:
- Note: All the setting angles of the above vanes are 30. 注:以上葉片安裝角均為30。
- The series nozzles with different characteristics as angle of nozzle core,outlet length and outlet turbination are machined. 國內外除霧器沖洗噴嘴一般采用實心錐噴嘴,考核噴嘴性能的重要指標是擴散角和均勻度。
- The results demonstrate that the setting height,length,setting angle,rotary angle of the rotational flow guide device and immersion depth of SEN have obvious effects on the fluid flow field in mold. 結果表明,旋流導向裝置的安裝高度、長度、安裝角度、旋轉角度和水口浸入深度對結晶器內流場有明顯的影響。
- Normal elevation angle of nozzle 常用噴射仰角
- She hit her knee against the angle of the bed. 她的膝蓋撞到床角上了。
- The working principles of nozzles with plane and cylinder spiral flow passage respectively, are analyzed from the angle of hydrokinetics. 從流體動力學角度分析了平面螺旋流道型和圓柱螺旋流道型噴嘴的工作原理。
- Method for determining setting angle of mixer's blades 攪拌機葉片安裝角的確定方法
- Attaches over blast end of nozzle to break up pellets. 連接在噴嘴的噴射端之上,用于分散顆粒。
- The earth's axis is titled at an angle of about 231. 地軸傾斜成約二百三十一度角。
- The angles of a triangle total 180. 三角形的三角之和等于180°。
- Calculating Method for Setting Angle and Entrance Angle of Disc Cutter 盤形刀具安裝角與切入角的一種計算方法
- Variation and Adjustment of Setting Angle of Hobbing Cutter for Precision Gear 精密齒輪滾刀安裝角的變化與調整
- Based on the above study, a S2 surface streamline curvature inverse problem through flow FORTRAN code is developed with an inner-united part of blading for the impeller blade and the nozzle vane. 在以上研究的基礎上,本文發展了徑流式渦輪的基于S2流面的流線曲率法通流程序并包含有葉片造型設計程序,并將它們結合在同一個程序中。
- The two roads lie at an angle of about45 degrees. 這兩條路交叉成45度角。
- The angle of projection affects the answer. 拋射角對結果有影響。
- The two roads lie at an angle of about 45 degrees. 這兩條路交叉成45度角。
- Adjustment of elevation angle of nozzle and its effect on hydraulics of whirl sprinkler 噴頭仰角調節機構的研制及其對噴頭性能的影響
- The angle ??is the angle of departure. ?蛭0發射角。
- An angle of 90°is called a right angle. 九十度角稱為直角。
- The two lines are united at an angle of 45°. 兩線以45度角結合。