您要查找的是不是：
- Thrust ball bearing is separable bearing and only can be subject to axial load. 推力球軸承為可分離型軸承，只能承受軸向載荷。
- Retaining the rolling elements, where bearings are of a separable design and one bearing ring is removed during mounting or dismounting. 分離型軸承在安裝或拆卸過程中一個軸承套圈被取下的情況下,保持滾動體。
- Inner raceway grinding is more difficult in bearing ring production. 軸承內圓磨削加工是軸承套圈磨削加工比較困難的工序。
- With separable bearings, the ring with the rolling element and cage assembly can be removed independently of the other ring. 對于分離型軸承,帶有滾動部件和保持架組件的套圈可以與另一套圈分開拆卸。
- This separable bearing can support axial load with low limit rotation speed, and has single and double direction two kinds. 這種軸承為可分離型軸承，只能承受軸向負荷，極限轉速低?？煞譃閱蜗蚝碗p向兩種。
- Unilateralism trust ball bearing is separability bearing, it is made by axial ring, washer, ball and retainer. 單向推力球軸承是可分離型軸承。
- The fit of a bearing ring on its seating must not lead to uneven distortion of the ring (out-of-round). 軸承圈在其支承面上的配合不得導致軸承圈的不均勻變形(不圓度)。
- Four pionts angle contact ball bearing is separable bearing,it can be subject to bi-directional load and have the function of both single row and double rows bearings. 四點接觸球軸承為可分離型軸承，可承受雙向軸向載荷，并有單列和雙列角接觸球軸承的功能。
- The structure, control principle and main part design features are introduced for precision rolling machine of the tapered bearing ring. 介紹了圓錐軸承套圈精密輾擴機的結構、控制原理及各主要組成部分的設計特點。
- When grinding the bearing ring, the outside diameter of it was taken as locating datum to process the outer raceway with the assistance of electromagnetic centerless clamper. 在分析磨削加工精度影響因素的基礎上,主要討論了齒輪磨床的剛度特征,從靜態剛度入手,對動態穩定性問題進行了深入研究。
- In terms of both theory and practice,external centerless grinding of bearing ring was analyzed in greater detail,which has obvious guiding significance to production. 從理論和實踐上對軸承套圈外圓無心磨削進行了比較詳細的分析,對生產有一定的指導意義。
- The separable bearings of series NKXR, on the other hand, should preferably be lubricated with oil, as an adequate oil supply is relatively easy to arrange. 另一方面,NKXR系列的可分離型軸承最好應用油來潤滑,因為比較容易供應足夠的油。
- Y-bearing with zinc coated bearing rings and special non-toxic grease. Y-軸承,帶鍍鋅軸承圈和特種無毒性油脂。
- Y-bearing with zinc coated bearing rings and zinc coated locking collar. Y-軸承,帶鍍鋅軸承圈和鍍鋅鎖定環。
- Where operating conditions necessitate interference fits and it is essential that mounting and dismounting can be done easily, separable bearings, or bearings with a tapered bore may be used. 在運行狀況要求過盈配合,同時需要安裝與拆卸方便的情況下,可以使用可分離型軸承,或帶有圓錐孔的軸承。
- It can replace traditional isothermal anneal as advance heat treatment of roughcast of bearing rings. 可部分替代傳統的等溫退火作為軸承套圈毛坯的預先熱處理。
- When the axial component of combined loads is large, it may be supported independently from the radial load by a separate bearing. 當混合負荷中的軸向負荷很大時,可以與徑向負荷分開,由另外一個軸承獨立支承。
- Usually these bearings are arranged in pairs either back-to-back or face-to-face, and one bearing ring is axially displaced until a given clearance or preload is attained. 通常這些軸承是背靠背或面對面配對,其中一個軸承圈為軸向位移,直至達到選定的游隙或預負荷。
- The common ceramic used for SKF bearing rings and rolling elements is a bearing grade silicon nitride material. 常用于SKF軸承套圈和滾動體的陶瓷材料是軸承級的氮化硅材料。
