您要查找的是不是：
- Pry lamp lens from lamp housing. 從燈泡外殼處探測燈的燈罩。
- Pull lens downwarRemove it from lamp housing. 將燈罩向下拉。將其從燈的外殼上拆下。
- Install bulbs and sockets in the lamp housing. 安裝燈泡和插座于燈外殼上。
- Position dome/reading lamp housing at headliner cavity. 將圓頂照明/閱讀燈外殼定位于車頂蓬內襯槽中。
- Position dome/ reading lamp housing at headliner cavity. 將圓頂照明/閱讀燈外殼定位于車頂蓬內襯槽中。
- Position the lamp housing in the quarter panel and push to engage the grommet. 將燈外殼固定于后側板并將其推入以嚙合套環。
- Position switch into license plate lamp housing and connect switch harness connector. 定位開關到牌照燈殼，連接開關線束接頭。
- Squeeze switch locking tabs inward to release switch from license plate lamp housing. 向內擠壓開關鎖凸耳，以從牌照燈殼中釋放開關。
- Replace by seating the assembly in the lamp housing and turning the lock ring 1/8 turn clockwise to secure. 更換組合，將組合定位于燈的外殼并順時鐘旋轉鎖桿1/8圈以固定。
- The lamp is so wired that when the main safety switch is turned on ,the motor blower automatically operates to circulate the air in the lamp housing. 燈的連接情況是這樣：當主安全開關接通時，電機吹風機便自動工作，使燈罩內的空氣環流起來。
- Less amount in the lamp house: there are about a dozen units of module set in per square meter of the vacuum-thermoform letter. 二、光源使用數量少：每平方米吸塑字一般只用十幾個模組。
- The scope of business of our company involves having: 1.The intention, designing, making, issue in outdoor advertisements, such as floor body, lamp house, signpost, wall body,etc. 本公司業務范圍涉及有: 1.;樓體、燈箱、路牌、墻體等戶外廣告的創(chuàng )意、設計、制作、發布；
- An incandescent lamp or its glass housing. 燈泡白熾燈或其玻璃外罩
- The lamp fell plonk on the table. 臺燈砰的一聲倒在桌上了。
- This piece of glass seems to be part of a lamp. 這片玻璃似乎是一盞燈的一部分。
- A moth was fluttering round the lamp. 有一只蛾子撲打著翅膀繞著燈飛。
- Half the oil in the lamp had burnt away. 油燈中一半的油已經燒掉了。
- A miner's lamp is fixed onto his helmet. 礦燈固定在礦工的頭盔上。
- A red lamp is often a danger signal. 紅燈常常是危險的信號。
- He ran against a lamp post in the dark. 在黑暗中他撞上了一根電線桿。
