您要查找的是不是:
- There is no Name field for the reset button. 沒有用于重設按鈕的Name字段。
- Remove SD card. Push in the reset button. 移掉SD卡,軟起即可。
- Immediately release the reset button. 立即松開復位按鈕。
- Lightly press the RESET button with a thin rod. 用細桿輕按reset(重調)鍵
- Improved Added a layout reset button in thr. 在字幕布局編輯器中增加“重置所有設置”按鈕。
- Press the reset button to turn off the alarm indicator. 按復位鍵關閉告警指示器。
- The Reset button clears the pattern so all files are displayed. “重置”按鈕可清除模式以便顯示所有文件。
- Pre the reset button to turn off the alarm indicator. 按復位鍵關閉告警指示器。
- On the Tools menu, click Choose Toolbox Items, and select the Reset button. 在“工具”菜單上單擊“選擇工具箱項”,再選擇“重置”按鈕。
- Improved Added a layout reset button in the Subtitles layout editor. 在字幕布局編輯器中增加“重置所有設置”按鈕。
- Retry this command until the mouse connects. You may have to turn it off and on or press the reset button a couple of times. 不斷重試這個命令直到鼠標連接成功。你應當在一段時間內不斷地關閉并打開鼠標或是按鼠標的重啟按鈕。
- An example of a composite control is a control that consists of a text box and a reset button. 其中的一個示例就是由文本框和重置按鈕組成的控件。
- If, after pressing reset button, valve does not stay open allowing gas to flow to the burner, insufficient cooling of the water is the probable cause. 如果按下重置按鈕后,閥門不能夠停留在開啟的位置讓燃氣流向燃燒頭,可能就是因為水溫降得還不夠低造成的。
- The high limit control can be reset by firmly pushing in the red reset button located on the thermostat. 高溫限制控制可以重置,只需在溫控器上的紅色重置按鈕上使勁按一下即可。
- HDD LED in Reset button (Orange LED) and Standby/Power LED in Power Button (Red LED). 硬盤驅動器的LED在復位按鈕(橙色發光二極管)和備用信用證/功率LED在電源鍵(紅色LED)。
- Failure reset: Incoming faults have to be acknowledged by pressing the “Failure reset” button on the visualisation. 出錯后復位:出現的錯誤必需要按動面板上的“出錯后復位”鍵來認可。
- Regarding Russia Mr Obama has developed a policy of notably warmer ties, dubbed “hitting the reset button”. 關于俄羅斯,奧巴馬提出一項更為溫暖的關系政策,命名為“敲敲復原鍵”。
- Reset Button - After operating from high temperature, the gas shutoff must be manually reset (opened). 重置按鈕-在高溫操作后,關閉的燃氣必須通過人工重置(開啟)。
- The following code example demonstrates how to use the HtmlInputButton control to create a command button, a Submit button, and a Reset button. 下面的代碼示例演示如何使用HtmlInputButton控件創(chuàng )建一個命令按鈕、一個“提交”按鈕和一個“重置”按鈕。
- If you have a Button control that needs to disable this behavior, such as a reset button, set the CausesValidation property to false. 如果Button控件需要禁用此行為(如reset按鈕),請將CausesValidation屬性設置為false。