您要查找的是不是：
- Curing: The rapid solidification of ink or varnish by means of chemical action. 固化:用化學方法使油墨或光油速變成固體。
- Magnetic field simulation of induction heating in glass-coated copper microwire rapid solidification process[J]. 引用該論文 周秀文;蔡紅梅;張繼成;劉德斌;孫祚科;余斌.
- Titanium alloy powder was prepared by rapid solidification and mechanical milling. 采用快速凝固/機械球磨法制備鈦合金粉末;
- The influences of phosphorus content and solidification rate on the interfacial morphology are investigated. 考察了磷含量和凝固速度對蠕墨鑄鐵液-固界面形態的影響；
- The technique provides a new path to studying some nonequilibrium phenomena in rapid solidification for researchers. 這就為研究者研究合金快速凝固中的一些非平衡現象提供了一種新的途徑。
- WT5”BZ][ST5”BZ]High energy density electron beam is employed in surface rapid solidification on Ni plated Ti alloy. 采用高能量密度電子束進行了鈦鍍鎳合金表面熔凝處理的研究。
- On rapid solidification and the same aging condition, the hardness and electrical conductivity can reach 126HV and 70%IACS respectively. 快速凝固和同樣的時效條件下,硬度為126HV,導電率達70%25IACS。
- And it is discovered that the liquidus temperature hardly has effects on the solidification rate of alloy if solidus temperature is fixed. 并發現,對于合金凝固,在固相線溫度一定的情況下,液相線溫度的高低對凝固速度幾乎沒有影響。
- Conventional planar flow casting(PFC)is one of rapid solidification processes for fabrication of microcrystalline or amorphous ribbons. 傳統平面流鑄技術是用于生產微晶或非晶合金薄帶的一種快速凝固技術。
- Such phenomena were explained by analyzing the rapid solidification of monotectic alloys under the rapid solidification. 此外，還分析了快速凝固下偏晶合金的凝固過程，對上述現象進行了解釋。
- Rapid solidification (RS) technique is one of the most effective ways to improve the properties of hypereutectic Al-Si alloys. 快速凝固技術是改善過共晶鋁合金組織和提高其性能的有效手段，快速凝固過共晶鋁硅合金是具有巨大應用潛力的活塞材料。
- All results have important meanings to understanding the dynamic process of electro-thermal explosive and rapid solidification process of coating. 本文的結果對于了解電熱爆炸的動力過程和涂層的快速凝固過程具有重要意義。
- Eight kinds of A1-Si-Cu-Nii ribbons were prepared by means of rapid solidification,the effects of alloy elements on properties of Al-based alloys were analyzed. 利用快速凝固技術制備了8種A1-Si-Cu-Ni四元合金釬料,研究了合金元素對鋁基釬料性能的影響。
- Rapid solidification microstructures of Cu-Cr binary hypereutectic alloy at deep undercooling[J].The Chinese Journal of Nonferrous Metals, 2002, 12 (5): 891-896. Cu-Cr二元過共晶合金的深過冷及快速凝固[J].;中國有色金屬學報;2002;12(5): 891-896
- It is characterized of strengthening the coating\'s elasticity of printing ink prominently,the improvement of printing efficiency and rapid solidification,etc. 具有顯著加強印刷墨層彈性，提高印刷效率，固化速度快等特點。
- The percentage of RE in the matrix increases with the increase of solidification rate;the carbides in directional solidification microstructure are refined by RE added in high chromium cast iro... 稀土對高鉻鑄鐵定向凝固組織中的碳化物具有細化作用,并隨凝固速度的增加,定向凝固高鉻鑄鐵組織細化程度提高,同時稀土的加入使高鉻鑄鐵的抗拉強度明顯提高。
- The phase structures and the electrochemical properties of the TiV-based hydrogen storage electrode alloy Ti0.8Zr0.2V2.4 Mn0.48Cr0.72Ni0.9 after rapid solidification have been studied. 研究了快速凝固處理對鈦釩系貯氫電極合金Ti0.;8Zr0
- In the present study, the AZ91 magnesium alloy strip chip is prepared by twin-roll rapid solidification technique, it is find that the microstructure is fine; the average microhardness is higher than that of the traditional cast alloy. 本研究利用霧化技術將液流破碎成細小液滴,用雙輥熔體旋鑄法制備了AZ91鎂合金薄帶碎片,其微觀組織細小,平均顯微硬度比鑄態的有很大提高。
- In this paper, the preparation principle and the processing of magnesium alloy ribbon chip is introduced, the effect of subsequent heat treating of rapid solidification strip chip on the microstructure is analyzed. 文中介紹了鎂合金快速凝固薄帶碎片的制備原理及工藝方法,分析了后續熱處理對快速凝固薄帶碎片微觀組織的影響。
- Differential scanning calorimetry(DSC), electron probe microanalysis(EPMA) and rapid solidification were adopted to study the effects of Ni and Mn on the microstructure, solidification process and aging hardening characteristics of Al Si Cu Mg alloy. 采用DSC差熱分析及急冷試驗方法并輔以微區成分分析 ,探討了Ni和Mn對Al Si Cu Mg四元合金凝固組織、凝固過程及時效硬化特性的影響。
