您要查找的是不是：
- The effect of cycle?temperature and material state on mechanical properties of the L2 pure aluminum are investigated in the paper. 通過實驗研究了軋制道次、溫度與材料狀態對L2純鋁力學性能的影響。
- Today, in industry applications, pure aluminum foam has attracted more and more people s attentions as a kind of toughness metal foam material, for its good energy-absorbing performance. 目前在工業應用中,泡沫純鋁作為一種韌性泡沫金屬材料由于其良好的吸能性能越來越受到人們的關注。
- Good ductility and corrosion resistance. Gas welding and argon arc welding of pure aluminum. 塑性好、耐蝕。純鋁氣焊、氬弧焊用。
- Refining effect of boron on the hypoeutectic Al Si alloys and pure aluminum has been studied with SEM and XRD. 利用DSC，SEM 和X 射線衍射等手段， 分析了硼對純鋁及亞共晶Al?Si 合金的細化作用。
- Adhensive Gasket:This product is made of pure aluminum foil and glue.Good sealing and good viscosity. 不干膠型墊片：本產品由純鋁箔與膠水經特殊處理而成。密封、粘貼性強。
- Ezletter CNC Auto Notcher pro is designed for the largest channel letter with thick Aluminum material. 且可雙邊剪齒，共同4個刀頭，易于調節。
- The defects of welding of pure aluminum are air hole, un interfuse, occlude and holding wolframium, etc. 純鋁在焊接過程中存在的主要缺陷是氣孔、未熔合、夾雜及夾鎢等。
- Aluminum material be aluminized level abradability poor prone to scratching, densed surface is damaged. 真空鍍鋁材料的共同特點是：鍍鋁層面耐磨性差，因而容易產生劃痕，致密表層被破壞。
- It was shown that comparatively high sili-con content in pure aluminum resulted in the occurrence of the surface veins. 結果表明，該燈罩材料中硅含量偏高是旱致“水紋”產生的主要原固。
- The driver chassie is a pure aluminum die cast contruction with an acoustically transparent design. 驅動器底座為純鋁鑄結構，采用透聲設計。
- It can form a plain panel by biding aluminum material and high polymer film together under constantly high temperature ang pressure. 其原理是鋁材(板)芯材與高分子膜在連續高熱高壓作用下牢固的粘合，形成平整板面。
- The effect of ECAP passes on materials mechanical properties of industrial pure aluminum L2 was investigated with equal channel angular pressing (ECAP) process . 利用等通道轉角擠壓(ECAP)技術擠壓工業純鋁L2,探討了擠壓次數對其力學性能的影響。
- In this paper the construction method,the general structure and the solution of key problem of the extrusion die CAD/CAM system for aluminum material is introduced. 本文介紹了鋁型材擠壓模CAD/CAM系統的構造方法和總體結構,以及其中關鍵問題的解決方法。
- In this study,the effect of ultrasonically melt treatment method on solidification structure of pure aluminum ingot was investigated,e. 用高效熔體處理技術制備試驗用易拉罐用鋁材,探討了該技術對其鑄態組織與力學性能的影響規律。
- It includes the mullite fiber, high alumunum fiber and pure aluminum fiber, which can be ade into the bulk fibers, fiber felts and feber paper. 分為莫來石纖維、高氧化鋁纖維和純氧化鋁纖維，可制成纖維塊、纖維氈、纖維板和纖維紙等制品。
- SEALS use aluminum material for the body with the advantages of light and convenience. Meanwhile,we adapt the volume adjuster for moderate operation power. 本體采鋁材質，輕巧方便，采用氣流調整閥，可依工作需要，調整力量。
- The maximum stress, strain and temperature in aluminum material are all found to occur near the die bearing, so the severest wear happens to die near die bearing. 棒料進人?？谥镣耆鞒龉ぷ鲙н@段時間是型材擠壓最為困難的階段，材料在工作帶處的應力、應變最大，溫度最高，因而對模具工作帶處造成的磨損也最為嚴重。
- The densification and deformation behavior of pure aluminum by powder metallurgy during the ECAP process was studied by compressible rigid plastic FEM. 針對純鋁粉末多孔材料,采用可壓縮剛塑性有限元法對其等徑角擠壓過程進行數值模擬,并著重分析了靜水壓力對擠壓效果的影響。
- The first all-metal monoplane, designed by Hanna Reissner of Germany, which first flew in 1912, had wings of pure aluminum. 因為很少有像飛機那樣的制品對材料的性質、重量及工作溫度有那樣嚴格的要求。
- The quasi-static indentation experiments of the pure aluminum foams and the Al-Si alloy foams were carried on using three types of indenter with different end geometries,i. 分別采用頭部為平面、球面和圓錐面的三種圓柱體壓頭,對泡沫純鋁和泡沫鋁-硅合金進行了準靜態壓坑試驗,研究不同性質的基體泡沫鋁的壓坑變形力學行為,探討壓坑變形的微觀機制。
