您要查找的是不是：
- Lpr. Exe Send a print job to a network printer. 重定向打印任務到網絡(luò )中的打印。
- Print job %1 has been deleted and will not print. 已刪除打印作業%251,不會(huì )再打印。
- You specified an invalid print job number. 指定的打印作業號碼無效。
- Can you send the job specification to me at once? 你能把工程作業的詳細說明馬上送來嗎?
- Unable to start print job due to insufficient memory or invalid printer specification. 由于內存不足或指定的打印機無效,無法啟動打印作業。
- Stopped indicates that the printer's print job queue is stopped. “已停止”說明打印機的打印作業隊列已停止。
- A PrintSystemJobInfo that represents the print job and its status. 用于表示打印作業及其狀態的PrintSystemJobInfo。
- Informs the device driver that a new print job is starting. 通告設備驅動程序開始一項新打印作業。
- This message is from the lp command; it shows the print job id. 該消息來自lp命令;它顯示打印作業標識。
- You may not be able to finish the current print job. 可能無法完成當前打印作業。
- Cancels all print jobs on the selected printers. 取消所選打印機上的所有打印作業。
- The target printer is not accepting print jobs. 目的打印機不接受打印任務。
- Gets or sets a value indicating whether the print job should be canceled. 獲取或設置一個值,該值指示是否取消打印作業。
- Job Title SDET Lead Job Specification We are looking for a results-oriented candidate that is capable to perform soli...... ... 公司名稱：北京軟通動力信息技術有限公司工作地點：廣東省深圳市發布時間：2009-3-27
- This operation cannot be performed on the print job in its current state. 在打印作業當前狀況下,無法執行這項操作。
- Therefore limit the baud rate to 76,800 baud unless required by job specification and observe the following wiring guidelines. 因此限制鮑率為76,800 鮑除非被工作規格需要而且觀察下列各項配線指導方針。
- PCONSOLE to check the DMPQUEUE.You should see a new print job in the queue. In case it 本站所提供的攝影照片，插畫，設計作品，如需使用，請與原作者聯系。
- The job specifications summarized the design criteria. 工作說明書概括總結了設計要求。
- This is the machine you want to work on and send print jobs from. 這是指你在上面工作并希望從這里發送打印作業的計算機。
- Drivers from the abolition of a print job, the supply will be temporarily lights flashing. 從驅動程序取消一個打印作業時，電源指示燈會(huì )暫時閃爍。
