您要查找的是不是：
- But the Brep or solid model can’t achieve this. 邊界面與實體模型很難作到這一點。
- Owing to the second kind dilatational wave, the wave phenomena in liquid-saturated porous solid are more complicated than in single-phase solid. 慢 波的存在使得兩相介質中的波動現象比單相介質中的波動要復雜的多。
- The medium is considered as a viscoelastic, anisotropic, porous solid frame such that its pores of anisotropic permeability are filled with a viscous fluid. 考慮的介質是粘彈性的、各向異性的、多孔固體骨架，其各向異性可滲透的孔隙中充滿著粘性液體。
- Using the method can quicken the speed of building solid model bank and has actual significance to build complicated scene fleetly. 運用此方法可加快三維模型庫的建立，對于復雜場景的快速搭建有實際意義。
- The representation and abstract method of the feasible clamping face of a part from the solid model are proposed. 本文提出基于實體模型的工件的可行夾緊表面信息的提取與表示方法，從零件信息中提取可行的裝夾表面信息；
- The formulas of heat of vaporization and vapor pressure are derived, for the Einstein and Debye solid model. 用固體的Einstein模型與Debye模型分別導出了相應模型的固氣相變的蒸發熱和蒸發壓公式;并對其做了數值計算.
- The formulas of vapor heat and of vapor pressure is derived and computed by the Enistein and Debye solid model. 用固體的Einstein模型與Debye模型分別導出相應模型的固氣相變的蒸發熱和蒸發壓公式,并對其做了數值計算。
- Results The accurate solid model of masticatory muscles and mandible was reconstructed and t... 結論在可視化人體超薄切片基礎上,所確定的咀嚼肌三維肌力向量更符合生理狀況。
- The simple determination of specific surface area for porous solids by ethanol-desiccator method is described. 簡易干燥器乙醇法測定多孔物質比表面積。
- A material feature-based heterogeneous solid model was developed to represent the heterogeneity of biomaterials. 為表達生物材料的非均質性,提出基于材料特征的非均質實體模型。
- The cutting process was performed through subtraction boolean operation of the solid model of workpiece and cutter. 利用齒坯實體模型和刀具實體模型做布爾減運算,來實現模擬工件材料的去除過程;
- Methods A three-dimensional solid model of masticatory muscles and mandibule was built up on basis of images of Chinese Visible Human. 方法利用可視化人體圖像先對咀嚼肌進行三維重建,再確定各咀嚼肌的最大生理性橫截面積,計算出最大肌力后,再進行向量分解。
- micropolar liquid-saturated porous solid 微極流體-飽和多孔固體
- porous solid polymer electrolyte(PSPE) 多孔型聚合物電解質
- The parameterized solid model of helical gear and dynamic simulation of mesh force in gear meshing process is taken as an example of this method. 如果用普通程序去開發一臺適合于新型工件的纏繞機,不僅研究經費巨大而且不一定取得預定的效果。
- Based on the superposition principle of Boltzman,the elongation-stress relaxation process of yarns is analyzed using the standard linear solid model. 以標準線性固體模型為基礎,利用玻爾茲曼疊加原理對紗線在拉伸松弛過程中的力學行為進行分析,建立紗線應力松弛的理論方程。
- A brief review on the background, industrial applications, and puzzles in fundamental theory of the physisorption of gases on porous solids at above critical temperatures was presented. 本文簡要述評超臨界溫度條件下氣體在多孔固體上物理吸附平衡問題提出的背景, 工程應用, 及其理論基礎方面存在的問題。
- Based on the machining theories and gear profile equation, using computer graphics, the article builds the surface model and solid model of honner. 本文根據珩輪的加工原理和齒面方程，利用計算機圖形學方法，分別建立了珩輪的表面模型和實體模型。
- Attenuations of different types of gas hydrate cementation in fluid-saturated porous solids are discussed.The factors affecting estimation of gas hydrate and free gas saturation are analyzed. 摘要討論了不同水合物膠結類型的流體飽和多孔隙固體中地震波的衰減情況，分析了估算天然氣水合物和游離氣飽和度影響因素。
- This paper introduces an evidential reasoning-based approach for recognizing and extracting manufacturing features from solid model description of objects. 本文介紹了一種為識別和提取對象的實體模型描述，基于證據推理的方案。
