您要查找的是不是：
- The gradual plastic deformation of a solid body, as by heat. 漸變如用加熱的方法造成一個固體物質緩慢的、人工的形狀損壞
- It provides a scientific evidence for study on the plastic deformation of ledeburite steel and iron materials. 為萊氏體鋼鐵材料塑性變形的研究提供了科學的證據。
- The plastic deformation of a metal at a temperature below that at which it recrystallizes. 金屬在再結晶溫度以下進行的塑性變形。
- Pore deformation of low-permeability gas reservoirs is characteristic of elastic plastic deformation. 低滲透氣藏孔隙變形具有彈塑性變形的特征。
- Vibratory stress relief (VSR) can reduce the residual stress in component.The mainly cause is microcosmic plastic deformation of local region. 振動時效使殘余應力峰值降低并得到均化的主要原因是材料內部微塑性變形的局部性。
- With respect to the repeated impact loads, we have analyzed the typical failure process and the fatigue cumulating plastic deformation of the coat. 對多次撞擊載荷下涂層零件的典型失效過程和涂層與基體的疲勞累積塑性變形進行了初步分析。
- The crystallology, dislocation mechanism and geometry of twinning during plastic deformation of magnesium alloys are overviewed in this paper. 結果表明:在溫變形的初始階段,孿生為主要的變形機理和硬化機制。
- The GLC coating can reduce the plastic deformation of work piece material and has low wettability with the contacting Al-Si alloy. 本論文采用室溫的摩擦磨損實驗以及真空熔融測試潤濕性實驗分別評價力和熱作用時鍍層的效果，綜合二者的實驗結果和切削實驗結果一致。
- He looked through a pane of glass. 他從一塊玻璃看過去。
- The plastic deformation of the slab being pressed by sizing press(SP) is expounded,and the bending of the slab end is theoretically analyzed as well. 對SP側壓過程中板坯的塑性變形情況,及板坯尾部的失穩彎曲進行了理論分析。
- This piece of glass seems to be part of a lamp. 這片玻璃似乎是一盞燈的一部分。
- Plastic deformation of the paper, leaving a large imprint area, predeformation cannot be recovered, leading to larger overprinter error. 彈性變形不小的紙張，挨近壓印區此后，變形度不克不及復興，變成較不小的套印差錯。
- I want a kind of glass dish that resists heat. 我想要一種耐熱的玻璃盤。
- The elastic unloading is replaced by elasto-plastic, then the boundary surface model can be used to analyze the plastic deformation of soft clay during unloading process. 將傳統邊界面模型的線彈性卸載過程改進為彈塑性,建立了軟粘土的邊界面廣義彈塑性模型,從而使邊界面模型可用于分析軟粘土卸載過程中的塑性變形問題。
- Characteristics of plastic deformation of stress minerals in veins, such as subgrain tectonics, deformation, lamellae and deformation bands, can be found. 金礦的形成富集與韌性剪切帶多期(次)活動密切相關，尤其是韌脆性變形期。
- It's a kind of glass that resists heat. 這是一種耐熱的玻璃。
- So the piston end design must be improved in order to avoid edge damage and damage of axis perpendicularity due to uneven plastic deformation of the piston end surface. 為了避免活塞因端面不均衡塑性變形而導致端部邊緣破損、端面與軸線垂直度破壞等情況發生，需要對活塞端部結構進行改進。
- The streaky and banded structures in the ores were resulted from the remobilization of solid-state mechanical transfer in plastic deformation of "soft" sulfides. 不同硫化物的不同變形習性，構成了脆性-塑性變形組構共存的復雜樣式，礦石的條紋和條帶狀構造主要是“軟”硫化物礦物塑性變形引起的機械再活化作用的結果。
- The pane of glass was broken by a football. 一塊玻璃被足球打碎了。
- Some splinters of glass had got into his feet. 他的腳上扎了一些碎玻璃屑。
