您要查找的是不是：
- Change layer mode to color dodge. 將層模式改變?yōu)轭伾珳p淡。
- PD/CD-ROM:Phase Change Rewritable Optial Disk Drive. 相變式可重復擦寫光盤驅動器.
- Overwriting Characteristic of GeSbTe Phase Change Erasable Disc[J]. 引用該論文 王瑞強;施宏仁;袁海駿;李錫善.
- Deflection of phase change cooled mirror induced by asymmetric facula[J]. 引用該論文 孫峰;余文峰;程祖海;張耀寧;周次明.
- How does power company fit phasic change? 電力企業如何適應形勢的變化？
- Differential Thermal Analysis did not reveal the ammonium perchlorate phase change from rhombic to cubic. 差熱分析沒有測出過氯酸銨從正交晶向立方晶的相變。
- A new kind of solid phase change material (PCM) prepared in our laboratory has been studied in this paper. 摘要制備了一種骨架為氯化聚丙烯、支鏈為聚乙二醇的新型相變材料。
- At high pressures, the combustion model should include droplet heating as well as phase change. 在高壓下，燃燒模型應當包括液滴加熱和相變。
- A numerical investigation is carried out for the phase change in the unsteady expansion of humid gases. 摘要采用數值方法對激波管非定常膨脹過程中，汽液相變與流場的相互作用進行了模擬。
- High temepreture phase change material(PCM)is widely used in heat receiver of space solar thermal dynamic power system. 高溫相變材料是空間太陽能熱動力發電系統吸熱器中普遍使用的蓄熱介質。
- Phase change microcapsule was prepared by melamine-formaldehyde resin and n-octadecane through in-situ polymerization. 采用原位聚合法用三聚氰胺-甲醛樹脂包覆正十八烷,制備出相變微膠囊。
- A simple model for heat transfer analysis of flat-plate heat exchanger with Phase Change Material (PCM)is built. 建立了板式相變貯能換熱器的無量綱傳熱模型。
- Liquid that is insulative, good diffluent, and strong in heat transfer through phase change. 具有絕緣強度高、流動性能好和相變傳熱能力強的液體。
- It is a difficult work to calculate the deflection of filament wound tapered tube at bending because of changing layer thickness in every cross section. 纖維纏繞的錐形管,由于各截面的纖維層厚在不斷變化,彎曲變形計算比較困難。
- Polyethylene glycol(PEG) is a kind of phase change materials with high enthalpy and low thermal hysteresis. 聚乙二醇相變材料是一類相變焓較高、熱滯后效應低的儲能材料。
- Thermal energy storage are the technologies that make use of latent heat stored by Phase Change Materials (PCMs). 蓄熱技術利用相變材料（Phase Change Material，PCM）的相變熱來儲存熱能。
- The results show that melting latent heat of the cool storage material is 149kJ/kg, phase change tempera. 通過實驗方法研究了空調蓄冷材料的相變溫度、相變潛熱和比熱等熱學性能。
- Stearic acid/silica white as solid - solid phase change material was prepared by blending. 用物理共混法制備了硬脂酸／白炭黑固-固相轉變材料,探討了該固-固相轉變材料形成的機理。
- The solid-solid phase change of the materials in fact was a crystalline-amorphous transition of PEG in the materials. 相變材料發生固一固相變的實質是，在升溫時材料中的PEG由結晶態變成了無定形態。
- The technology of phase change for heat storage is signality for energy source allocation. 但是單純的相變儲熱材料存在導熱性能差、達到相變溫度后液態化的缺點，實際應用可能性不大。
