您要查找的是不是：
- Parting line at the acceptable surface. 合模分布在合理可接受的表面。
- Parting line cleared and released properly? 分模線是否正確?
- Constructor if you do not want to change the default line indentation. 如果不希望更改默認行縮進,請使用。
- Parting line locks are required on all molds. 瑣模塊所有的模具都需要。
- The parting line tolerance for gib installation is +.000/-.002. 安裝導板的分模線公差為+.;000/-
- There's an undercut at this position and it needs a slider. It will also have a parting line on this side, is that OK? 產品的這個位置不能出模,我們打算做行位,在此面上會(huì )有分模線,你接受嗎?
- Becasue of hand deflashing, please mark the parting line into the drawing, and please let me know then the flash size. 因為手遮光，請將分界線在圖中標出來，并告訴確切尺寸。
- Mould halves requiring accurate alignment of core and cavity, and shut off should have appropriate part line locks. 上、下模需要精確配合或有擦位的地方,模具一定要有直身鎖。
- The parting line at ends of block should be designed such that any offset is in 1"increments for maintenance purposes on core. 考慮到動模維護需要,封膠面應有1”左右的偏移增量。
- The optimization parting direction was determined after all undercut features were distinguished, and the parting line and parting surface were confirmed accordingly. 通過側凹特征的判別確定模具的優化脫模方向，并確定模具的分型線和分型面。
- The selection of parting line,the determination of round sprue runner diameter,the design of round sprue runner shape and pouring gate form were presented. 介紹了模具分型面的位置選擇、圓形流道直徑的確定、圓形流道形狀的設計、澆口形式等。
- Elegant bombazine cloth gives a room infuse warm and downy sunshine. Upper part line with novel and chic blue, green, purple " leaf " , bright beauty. 精美的棉紗織品給房間注入了暖和柔和的陽光。上方襯以新奇別致的藍色、綠色、紫色“葉子”，明亮漂亮。
- I can probably give them more draft but I still want the round inside the cutouts which means I still want the parting line to be on the inside surface of the part in those areas. 我能給予他們更多的牽伸率;但我仍希望裁斷塊的內側圓些;我仍希望分開線在要在那些區域的內側平面上.
- Undercuts and similar parting line issues are made highly visible two dimensionally on our computer monitors-allowing us to avoid costly and time-consuming errors. 削弱和類似臨別線的問題是非常明顯的兩個三維電腦顯示器我們，使我們能夠避免昂貴和費時的錯誤。
- It's sad that we have to part company with them. 很遺憾我們要與他們分別了。
- An improvement plan on the demolding of plastic parts from injection moulds with flat gate and single parting line was proposed. 介紹了平澆口單分型面注射模塑件脫模的改進方案,分析了該注射模緩拉料機構的工作原理和模具工作過程,闡述了該模具結構設計的優點。
- Do not part with the shares on any account. 無論如何不要放棄這些股票。
- Backrind is a distortion that occurs at the mold parting line and leaves a ragged indentation in the part Backrind是指分模線上扭曲，導致制件上出現粗糙的缺口
- A part of this urgent task was allotted to us. 這項緊急任務的一部分分給了我們。
- If everyone does his part, the project will surely be a success. 如果大家都盡責，這個項目肯定會(huì )成功。
