您要查找的是不是：
- partially fixed end column 部分固端柱
- fixed end beam 固定端梁
- Vibration and stability are investigated for an axially moving beam constrained by a pinned end and a fixed end. 摘要研究一端簡支一端固支軸向運動梁的橫向振動和穩定性。
- fixed ended beam 固端梁
- A partial fix has been made for a rare client lock issue occuring when boarding and/or ejecting from ships. 一種罕見的在登船或離艦的時候發生的客戶端鎖死問題得到了部分解決。
- The fixed end moments acting on the member are ignored for the moment. 作用于該桿上的固端力矩暫且都不考慮。
- In the calculation of fixed end moments, joints B and C are temporarily locked. 在計算固端彎矩時，臨時鎖住共點b和C。
- It operates to exclude recognition of everything except what squares up with the fixed end in view. 這種目的除了與固定目標相符的事物以外,其他事物概不承認。
- Another theory is that having a greater mass under the fixed end of the reed somehow improves the vibratory properties of the reed itself. 還有一個理論認為簧片固定端下面較大的質量會(huì )提升簧片的振動特性。
- FLOW externally molded onto the body to indicate the fixed end containing a TFE seat. 流向)模鑄在閥體的外部，表示配置TFE閥座的固定端口。
- Each microactuator consists of two PT arms that are jointed at the free end and connected to an anchor at the fixed end. 該微驅動器由兩個光熱膨脹臂構成，兩者在自由端相互連接，而在固定端分別通過細橋與基底相連。
- Improvement on Bridge Type Hoist End Beam 橋式起重機端梁制造工藝改進
- double end beam supporting system 雙端梁支承系統
- The tables are firmly fixed to the floor. 桌子都牢牢地固定在地板上。
- The research project was only a partial success. 那個研究課題只取得部分成功。
- When competition, the athlete has on the elastic in an end fixed end springboard to take off completes the diving movement to call the springboard diving (springboard is apart from water surface highly gauge to decide as 1 meter and 3 meters). 比賽時，運動員在一端固定一端有彈性的跳板上起跳完成跳水動作稱跳板跳水（跳板距水面的高度規定為1米和3米）。
- SL cylindrical roller bearings are heavy series full complement double row bearings.Thee are two types:one has unfixed end (Series SL01 and Series SL04),the other has fixed end (Series SL02). SL型圓柱滾子軸承是雙列滿滾子型超重負荷軸承，有固定側(SL01型，SL04型)和自由側（SL02型）兩種。
- In this paper, the lamination board models with fixed ends were established with MARC and the mode analysis was carried on. 摘要用有限元軟件MARC建立了具有脫層和無脫層的兩端固支層合板模型，并進行了模態分析。
- He was only partially to blame for the accident. 他對事故只應負部分責任。
- When joining the fixed end of a single union valve, place the ball in the open position to allow for proper drying and to avoid primer or solvent cement contacting internal components of the valve. 在連接單個管套接閥門的固定端口時，將球體放置在開啟位置，使得閥內部件能夠得到干燥并避免底漆或液狀粘固劑接觸到閥內件。
