您要查找的是不是：
- The RHA, amorphous or partially crystalline, when used in an appropriate way, reduces autogenous shrinkage. 該殼灰，無定形或部分結晶，使用時以適當的方式，降低了自收縮。
- Therefore tensile strength of crystalline polymer sintered parts is close to the streng... 非晶態聚合物在燒結過程中體積收縮比晶態聚合物小;因而其尺寸精度較晶態聚合物高.
- Thus, two crystalline polymer blends can provide various conditions to study the crystallization behavior and morphology in polymer blends. 因此，兩個結晶聚合物共混物可以提供各種條件，研究的結晶行為和形態的聚合物共混物。
- Rheological properties of a thermotropic liquid crystalline polymer (TLCP) KU9231/Poly (phenylene sulphide) (PPS) blend were investigated. 研究了熱致液晶聚合物KU9231與聚苯硫醚共混物的流變特性。
- Polysulfone (PS) and Liquid Crystalline Polymer (LCP) were blended to prepare ultraflitration Membrane by using L-S phase-inversion method. 將聚砜與高分子液晶以溶液法共混,采用L-S相轉換法制膜。
- The advance of “In-situ” composites consisting of thermoplastic matrix and thermotropic liquid crystalline polymer was reviewed. 少量TLCP的加入加快了PET的結晶速率，提高了PET的結晶度。
- The recent development of in situ composites based on blends of a polyetherimide (PEI) and thermotropic liquid crystalline polymer (TLCP) was reviewed in this paper. 綜述了近年來聚醚酰亞胺和熱致性液晶高分子共混形成原位復合材料的研究進展。
- Preparing in situ composite by blending thermoplastic polymer (TP) with thermotropic liquid crystalline polymer(TLCP) is one of important approach to reinforce polymer. 用熱致液晶聚合物(TLCP)與熱塑性塑料(TP)共混制備原位復合材料是增強高分子的重要途徑。
- This paper has reviewed the polymer craze and its progress. The content includes craze difinition, classification, initiation, growth, fracture and the crystalline polymer craze. 綜述了國內外有關聚合物銀紋研究的進展,內容包括銀紋的定義、類、發、長、裂及結晶聚合物中銀紋的情況。
- The crystallinity of cotton was decreased and partial crystalline could be transfered into amorphous. 并可能將部分晶區轉變?yōu)闊o(wú)定形區；
- Several modified UHMWPE including liquid crystalline polymer,organ silicon materials,layered silicate that can be processed by common extrusion equipment were introduced. 介紹幾種可用普通擠出設備生產管材的改性超高分子量聚乙烯(UHMWPE),包括液晶聚合物改性、有機硅樹脂改性和層狀硅酸鹽改性等;
- We had developed Polysulfone(PSF)/Thermotropic Liquid Crystalline Polymer(TLCP) blends. But the poor compatibility of PSF/TLCP blends had limited their use in China. 針對聚礬 /熱致液晶聚合物 ( PSF/ TLCP)原位復合材料相容性差的問題 ,運用分子設計思想合成了一種馬來?；又垌吭鋈輨?。
- We had developed Polysulfone(PSF)/Thermotropic Liquid Crystalline Polymer(TLCP) blends.But the poor compatibility of PSF/TLCP blends had limited their use in China. 針對聚礬/熱致液晶聚合物(PSF/TLCP)原位復合材料相容性差的問題,運用分子設計思想合成了一種馬來?；又垌吭鋈輨?。
- In-situ hybrid composite, a group of composites with a novel stiucture, consists of fibers, liquid crystalline polymer fibrils and a thermoplastic matrix resin. 新型結構的原位混雜復合材料由纖維、液晶聚合物微纖和熱塑性基體樹脂組成。
- Both amorphous and crystalline polymers can yield and be cold-drawn. 無定形和結晶聚合物兩者都能發生屈服并能冷拉伸。
- Since then in1996, the author renewed the formula of hopping current in crys-talline poly mers, derived the behavior equation of isothermal discharge of crystalline polymer electrets, and completed theo retical analysis of the empirical formula. 此后于1996年重建了結晶聚合物中的跳躍電流公式,導出了結晶聚合物駐極表面電位等溫衰減的行為方程,完成了上述實驗公式的理論解釋。
- The thermal properties, mechanical properties and morphology of blends of polyethylene sulfide (PPS) and two kinds of thermotropic liquid crystalline polymer (TLCP) were investigated. 本文研究了聚苯硫醚(PPS)與兩種熱致型液晶聚合物(TLCP)共混體系的熱性能、力學性能及形態。
- Using the transport equation for nematic liq-uid, the orientational motion of fiber spinning flow of liq-uid crystalline polymer (LC) is studied, including steadyand unsteady flows. 在取向運動輸運方程基礎上,研究液晶高分子紡絲拉伸流動取向特征、定常取向運動和非定常運動。
- Synthesis of liquid crystalline polymer, rheology of liquid crystalline polymer, electro-rheology, rheology of nano-composite polymer materials and effects of flow on polymeric reaction. 液晶高分子合成、液晶高分子流變學、區段式高分子流變學、電流變學、奈米復材流變學、流場對高分子反應影響。
- In situ hybrid composites based on thermotropic liquid crystalline polymer(TLCP) /glas5 fiber(GF)/polysulfone(PSF) and TLCP/GF/PSF grafted maleic anhydride(PSF-g-MAH)/PSF have been prepared. 通過對注塑樣品分層切片的光學與電子顯微鏡觀察，研究了熱致液晶聚合物／玻璃纖維／聚砜原位混雜復合材料的形態結構。
