您要查找的是不是:
- Clip cable to cable guide at valve cover. 把電纜夾進閥蓋上的電纜導槽。
- Each of your heart’s ventricles has an outlet valve. 每一側的心室都有一個出口瓣膜。
- Install relief valve cover nut and tighten. 安裝安全閥閥蓋螺母,并加以緊固。
- Remove the four screws holding the first check valve cover. 拆卸固定第一止回閥閥蓋的四個螺絲。
- Remove the four bolts that hold the relief valve cover in place. 拆卸固定安全閥閥蓋的四個螺栓。
- The outlet valves are to be blown out by the force of vapour. 出氣閥要靠蒸汽的力量沖開。
- Remove the relief valve cover bolts while holding the cover down. 拆卸安全閥閥蓋螺栓,握住閥蓋并將其取下來。
- Suzhou Tople Engine Parts Co.,Ltd. is a manufacturer specializing in producing inlet and outlet valve for automobile engine. 蘇州多譜路發動機零部件有限公司是一家外商獨資,專業生產汽車發動機進排氣門的生產廠家。
- The outlet valve of the plunger pump must be taken down before the inlet valve is hauled out with the former disassembling instrument for the valve. 柱塞泵的下凡爾損壞后,用原來配的凡爾拔出器拆卸時要先拆掉上凡爾,再拆卸維修下凡爾。
- Bite valve cover protects from dirt and debris, includes a bite valve inside. 咬合閥蓋保護閥遠離灰塵和碎片,包括內置咬氣門芯。
- Closing the filtered water outlet valve and lowering of the water level in the filter by opening the washwater discharge valve. 關閉濾后水出口閥門,通過開啟沖洗水排放閥降低濾池內的液位。
- Check whether or not the fuel injection pump plunger and fuel outlet valve is worn or clogged, plunger spring and fuel outlet valve spring is broke. 噴油泵柱塞及出油閥是否磨損或卡死、柱塞彈簧及出油閥彈簧是否折斷;
- Seals should be in place on all top hatch covers and bottom outlet valves. 在頂部的開口處與底部的出口處應有密封條?
- Lug Style valves cover the bolting the entire length of the body. 凸耳類型閥門配置貫穿整個閥體長度的螺栓連接。
- Using an appropriate sized wrench, loosen the check valve cover. Unscrew the check valve cover and lift it off. 采用尺寸大小適中的扳手松開止回閥閥蓋。寧松止回閥閥蓋并將其取出來。
- Heavy duty relief valve cover prevents vandalism and protects the valve from damage when the 994HMB is transported to another fire hydrant location. 重型安全閥閥蓋,預防故意破壞行為,當994HMB運輸到另一個消防栓位置時保護閥門不受破壞。
- Standard features include:3” waste outlet valve, left side service,2” fresh water outlet valve, sight glasses, hose bracket, strap tie-down brackets, bumper hitch, rear mud-flaps, wand holster, unique baffle design, keyed locking cabinets. 標準系統包括:3"大小排污口閥,左邊服務系統,2"大小清水閥、鏡、管支架、牽制下拉支架、撞緩沖器、方泥瓣、皮套、特設計擋板、鎖壁柜。
- Remove the relief valve cover, stem/diaphragm assembly, and relief valve spring. 拆卸安全閥閥蓋,閥桿/隔膜總成,和安全閥彈簧。
- Standard features include: 3" waste outlet valve, left side service, 2" fresh water outlet valve, sight glasses, hose bracket, strap tie-down brackets, bumper hitch, rear mud-flaps, wand holster, unique baffle design, keyed locking cabinets. 標準系統包括:3"大小排污口閥,左邊服務系統,2"大小清水閥、視鏡、軟管支架、捷牽制下拉支架、防撞緩沖器、后方泥瓣、棒皮套、獨特設計擋板、可鎖壁柜。
- Engine valve cover mounted with BMC is reduced by 0.7 dB comparing with that mounted with cast aluminum. 配裝壓鑄BMC復合材料和鑄鋁材料氣門室罩的2115型柴油機整機噪聲試驗也表明:用壓鑄BMC氣門室罩能降低整機A計權聲壓級噪聲0.;7 dB。